Gallery
Description
Features
Reviews
Q&A
SKB

collapse expand iconDescription

SKB is revolutionizing the instrument cases industry with the 3i-4214-56 injection-molded ATA flight guitar case that accommodates carved-top single cutaway guitars and is another added size in SKB's 3i series of waterproof cases.

The SKB 3i Series of injection-molded, waterproof instrument cases are constructed of ultra-high-strength, polypropylene copolymer resin and feature a gasketed, waterproof, airtight, and submersible design that is resistant to corrosion and impact damage. The SKB 3i-4214-56 guitar case has a continuous molded-in hinge; patented "trigger release" latch system with TSA recognized and accepted locks; four reinforced locking loops for customer supplied locks; comfortable, snap-down rubber, over-molded cushion grip handles; secure stacking; and automatic ambient pressure equalization valve all contribute to its military-grade design. The plush interior of this hardshell guitar case provides total neck support and protection on all sides.
Open Box SKB Injection-Molded Single Cutaway ATA Guitar Flight Case Level 1
Open Box SKB Injection-Molded Single Cutaway ATA Guitar Flight Case Level 1
Open Box SKB Injection-Molded Single Cutaway ATA Guitar Flight Case Level 1

collapse expand iconFeatures

  • Fits Gibson Les Paul, PRS Singlecut, ESP Eclipse among other carved-top single cutaway guitars
  • Ultra-high-strength polypropylene copolymer resin construction
  • Complete gasket seal makes the guitar case absolutely watertight (Military specification for waterproof and water-vapor proof cases for transit and storage: MIL-STD-C-4150J)
  • Automatic ambient pressure equalization valve (Military specification for automatic ambient pressure equalization valve & ingress protection rating: MIL-STD-648C & IP67)
  • Resistant to corrosion and impact damage
  • Continuous molded-in hinge
  • Patented "trigger release" TSA locking latch system
  • Reinforced, locking loops for customer-supplied locks
  • Rubber, over-molded cushion grip carrying handle and pull handle
  • Convenient, quiet-glide wheels
  • Lid depth: 1.5"
  • Base depth: 4"
  • Body length: 17-1/5" H
  • Weight: 19.3 lb.
  • Interior dimensions: 42" H x 9-3/4" W (upper bout), 13.1" W (upper bout) x 2.65" D

Featured Articles

collapse expand iconReviews

4.83

6 Reviews

100%

of respondents would recommend this to a friend

I have a couple of these now!
I have a couple of these now!
Sturdy!
Sturdy!
Filters
Best Uses
  1. Practicing1
  2. Protection1
  3. Travel1
  4. Protecting Your Guitar1
Cons
  1. Heavy1
  2. Heavy But Has Wheels1
Describe Yourself
  1. Novice2
Pros
  1. Easy To Use2
  2. Functional2
  3. Good Quality2

Reviewed by 6 customers

  • Great case and made in America! Highly recommended.

    5

    Verified BuyerVerified Buyer

    submitted7 years ago

    byKenneth

    fromundisclosed

    Great case and made in America! Highly recommended.

  • I have a couple of these now!

    5

    submitted9 years ago

    byRG

    fromIndianapolis

    I have bought a couple of these in the past, and this order adds another one to my collection. The interior design is now different than the other cases I have. If you look at my previous review, the interior of the last one was red, and it had a cover over the storage compartment. This one is a silvery-gray color, the storage compartment is bigger, but there is no lid on the storage compartment. I love that they made the storage compartment larger- it can hold my strap, a VOX coil cable, tuner, etc. and still has a LOT of room left. The old version can't hold that much. The only bad part is that you have to lay the case down flat to open it, otherwise stuff will fall out of the storage compartment. If that compartment had a lid I would give it 10 stars. As I said in the other reviews, this is a heavy case, but it does have wheels on it. It fits my Kiesel (aka Carvin) CS6M perfectly.

  • Sturdy!

    5

    submitted10 years ago

    byRG

    fromIndianapolis

    I love this case. It's a little bit big and bulky, but that's the price you pay for protecting your most prized guitars! It's also a bit heavy, but it does have wheels. Everything about this case seems super sturdy. I've been using it for about 2 years now, and it is my favorite case. Mine looks slightly different from the photo- mine has a red interior, and a lid over the storage space.

  • Great Case

    5

    submitted13 years ago

    byStuart Vogelman

    fromspokane, WA

    My son got the case to use on tour. Loves it. Both for travel/air, and tour.

  • Nice case

    4

    submitted13 years ago

    byDOUG YOUNG

    fromVancouver WA

    Love this case. You can stand on it, sleep on it, whatever and it seems to hold up. The latches feel very nice and work smoothly. The interior foam is firm. The only reason I didn't give it 5 stars is that the tuners touch the foam. This would allow flexing in the case to go straight to the headstock. I called SKB and they had me dent the foam in so they didn't touch anymore. This worked for 3 of my 4 Les Pauls but my robot still doesn't fit.

  • Rock-solid protection for your instrument!!!

    5

    submitted14 years ago

    byPete Paz

    fromPhilly, PA

    We've got 3 of these for our band now and they are hands-down the best cases we've ever used! Solid feel and great clasps. Edge of the case is molded in metal and has a great fit when closed, even after being sat on, slept on, dropped, thrown... We've had ours for a couple of years of weekly gigging and they've held up: A great value for the money! The plastic outside doesn't peal like the regular case that come with an LP. The SKB cases are stackable which is a touch to keep them secure in transit and during load-in. Won't take a sticker (outside too rough) but stencil's are cooler anyway, right!?!

  • Previous
  • 1
  • Next

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • submitted4 years ago

    asked byLee

    fromNV

    will this fit a Martin GPCPA1

    will this fit a Martin GPCPA1

    Open Reply - Beau
    This case would not be compatible with a Martin GPCPA1.