Gear SpecialistBundlingMusician
Audix M1250B Miniaturized Condenser Microphone Omni Standard
(0)|Q&A|Item #:1303337805182
Save on orders $199+ and get expert advice from a Gear Adviser
Need Help?
Description
The M1250B, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1250B, which is equipped with a cardioid capsule, is also available with hypercardioid, omni or shotgun capsules, giving the microphone the unique ability to be used in a wide variety of live, studio and broadcast applications.
The M1250B is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.
The M1250B is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.
Features
- 25' cable with mini-XLR (female) - XLR (male) connectors (CBL-M25)
- Mic stand adapter (MC-MICRO)
- Hanging clip (MC-HANGER)
- External foam windscreen (WS1218)
- Overhead mic for choir, group vocal
- Acoustic instruments
- Ambient room miking
- Symphonic area miking
- Speech, presentation
- Cymbals, percussion
Specs
- Transducer type: condenser
- Frequency Response: 50 Hz - 19 kHz
- Polar pattern: cardioid, hypercardioid, omni, supercardioid
- Output Impedance: 150 ohms
- Sensitivity: 10 mV / Pa (C) @ 1k; 10 mV / Pa (HC) @ 1k; 11 mV / Pa (O) @ 1k
- Signal/Noise Ratio (A-weighted): 73 dB
- Equivalent noise level (A-weighted): 21 dB
- Maximum SPL @ .5% THD: ?140 dB
- Dynamic Range: 119 dB
- Power requirements: 18 - 52 V
- Connector: 3 pin mini-XLRm
- Polarity: positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
- Housing: machined brass
- Finish: powder coat
- Weight: 0.7 oz / 20 grams
- Length: 2.1 inches / 54 mm