Skip to main content Skip to footer
15% off single item of $79 or more

Engl Invader 150W Guitar Amp Head

Item #: 
  • Write a Review

The Invader 150 Amp Head gives you maximum flexibility and control for any given playing situation. Easy to handle, the Inavader focuses on pure tube tone. Channel 1, 2, 3, and 4 are capable of produ... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email

Recommended Products

The Invader 150 Amp Head gives you maximum flexibility and control for any given playing situation. Easy to handle, the Inavader focuses on pure tube tone. Channel 1, 2, 3, and 4 are capable of producing different Overdrive/Gain structures--from Crunch to High Gain. Every overdrive voicing in the channels sounds different. In conjunction with the HI/Lo Gain switch and a separate EQ section for each channel, there are no limits. Once you've tried it, you won't escape the Engl Invader.


Two Gain variants for each of the basic channels
Four voicing sections: one EQ for each Channel featuring Bass, Middle and Treble
Bright sound-shaping button for Channel 1 and Channel 2,
Two effect loopsd B Master knobs are accessible via MIDI
MIDI In and Thru ports serve to integrate the amp into a MIDI system
128 MIDI presets, accessible via 16 MIDI channels
Offers three different remote interface ports: Serial Amp Control Port accepts the Custom Z-9 Footswitch (sold separately); the MIDI In accepts the Z-9 for use as a simple MIDI footcontroller or any other MIDI footcontroller; amp is equipped with a stereo jack that takes a dual footswitch, allowing you to switch the four channels remotely
Programmable Noise Gate for suppressing noise in Channel 2, Channel 3, and Channel 4
Output power: 150 watts

Input sensitivity
Input: from ”20 dB, , max. 0 dB
Effect Return: from ”20 dB nominal, max. 0 dB

Output level
SEND, level range: from ”20 dB to approx. 0 dB max.
Pre Out: -20 dB bis ca. + 3 dB max.
Line Out: approx. 0 dB at nominal power output

Power consumption: approx. 550 watts max.

External at 230/240 mains voltage: 2.5 ATL (2.5 amps slo-blo)
External at 100/115/120 mains voltage: 5 ATL (5 amps slo-blo)
Internal at 230/240 mains voltage: 3.15 AL (3.15 amps slo-blo)
Internal at 100/115/120 mains voltage: 6.3 ATL (6.3 amps slo-blo)

V1, V2, V3, V4, V5, V6: EL34, matched sets
V7: ECC83 FQ, input tube
V8, V9: ECC83 selected
V10: ECC83 standard

Logic control system
Processor, software: AT89C52 microcontroller with internal 8K Flash Memory for software source code, upgradeable with external Programmer
Memory: EEPROM 93C66 for data retention

System interfaces
MIDI: Asynchronous data protocol according to the MIDI standard, MIDI program changes 0 ” 127, MIDI channels 1 ” 16, MIDI controller 7 (main volume), value 0-5 = Master Volume Mute, Mute, value > 5 = default, Master Volume level

Serial Amp Control: Proprietary ENGL asynchronous data protocol
Dimensions: 71 x 28 x 29 cm
Weight: 52.9 lbs. (24 kg)
  • Customer Reviews

Review Snapshot

by PowerReviews
EnglInvader 150W Guitar Amp Head

(based on 1 review)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars



Reviewed by 1 customer

Displaying review 1

Back to Top

(1 of 2 customers found this review helpful)


prepare for........ "The InVader Of Your World"

By Chris

from Tucson, Arizona

Comments about Engl Invader 150W Guitar Amp Head:

upon seeing this jem at a local guitar center i instantly had to play it. Engl are known for their clarity in their distortion channels and the invader takes the cake for clarity. the Invader is Savage and takes no prisoners when it comes to saturation and the amount of girth you want in your tone. the Clean channel is crystal like and very smooth like water. when you engage the bright switch on the clean channel it brightens up the mids and the trebel giving a warm and bright boutique clean sound. the crunch channel can give an Ac/Dc sound or any kind of rock tone and the Hi Gain button when used on this channel can be a nice Rhythm tone live. Channel 3 is the Brutal channel. this is where the InVader starts to show its magic. When the Hi Gain button is off its a dry rhythm channel or a dry lead channel. if you turn the Hi Button on it turns into the Beast its Known for. Very low bottom end, crystal clear gain, perfect balanced mids. its what a guitarist wants in a very saturated tone. if you're a guy who loves The Black Dahlia Murder or loves Death Metal or just a guy looking to step up in the amp world the invader is for you. not does it have a Unique sound to it. it also challenges you to play better. im a very proud owner of this amp and would Highly recommend this to anyone looking to upgrade their tone. Just remember that EVERY Engl you play is going to have clarity and defined articulation.

Displaying review 1

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.