Gallery
Description
Features
Specs
Warranty
Reviews
Q&A
AKG

collapse expand iconDescription

The CROWN PZM-10 uses a miniature mic capsule mounted close to a sound-reflecting plate or boundary, in the pressure zone. In this zone, direct sound from the sound source combines in phase at all frequencies with reflected sound off the boundary. The benefits are many: 6 dB more sensitivity, 6 dB less noise, a wide smooth frequency response free of phase interference, excellent clarity and "reach", and consistent pickup anywhere around the mic. Frequencies below the voice range are rolled off to reduce pickup of air conditioning rumble. The high-frequency response is boosted slightly to help articulation.

The CROWN PZM-10 is a part of the Pressure Zone Microphone line, and is designed for security, surveillance, and conference-table use. Since they do not look like microphones, they are inconspicuous. The PZM-10 has a tubular housing that easily mounts in a 25/32-inch diameter hole in a ceiling panel, wall or table. It has a mic-level output and a 3-pin XLR-type connector for easy plug-in installation and requires 12 to 48Vphantom power.
AKG PZM10 Pressure Zone Microphone

collapse expand iconFeatures

  • Hemispherical polar pattern; clear, intelligible pickup of speech
  • Low profile, cylindrical design, perfect for wall or tabletop installations
  • Mic level output
  • Powered by 12-48 V phantom power, inline XLR connector
  • Ideal for use at podiums, ticket windows, conferencing, and surveillance and security
warning

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

collapse expand iconSpecs

  • Polar pattern: hemispherical
  • Frequency response: 80 to 20,000 Hz
  • Sensitivity: 2.5 mV/Pa (-52 dBV)
  • Maximum SPL: 120 dB
  • Equivalent noise level: 26 dB-A
  • Signal/noise ratio: 68 dB (A-weighted)
  • Impedance: 240 ohms
  • Finish: Off-white. May be painted any color.
  • Dimensions: ¸ 3.9 cm x 7.2 cm (¸ 1.53 x 2.829 in.)
  • Net weight: 74 g (22.6 oz.)
  • Connector: 3-pin XLR
  • ROHS: OK

collapse expand iconWarranty

AKG Acoustics, U.S. Limited Warranty

Amended July 19, 2005

AKG Acoustics warrants AKG products against defects in material or workmanship for a period of two years from the date of original purchase, and agrees to repair or, at our option replace any defective unit without charge for either parts or labor. AKG grants a three-year warranty covering selected products (C 12 VR, C 414 B-ULS, C 414 B-TLII, C 414 B-XLS, C 414 B-XLII, C 426 B, C 451 B, C 480 B, C 391 B, C 1000 B, C 2000 S, C 3000 B, C 4000 B, C 4500 B, SolidTube) against defects in material and workmanship.

Warranty is valid for AKG products purchased and delivered within the United States for the original purchaser only. The purchaser's Bill of Sale will serve as proof of sale and warranty validity in the U.S. Shipment of defective items to AKG for repair will be at the customer's own risk and expense. AKG will assume the return shipping cost for all items repaired under warranty.

IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product, loss of parts, or connecting the product to any receptacle other than specified.

This warranty is void unless AKG Acoustics, U.S.'s service center performs the repair. No responsibility is assumed for any special, incidental or consequential damages caused by the consumer. However, the limitation of any right or remedy shall not be effective where law prohibits such.

Featured Articles