Tonelux

collapse expand iconDescription

-The Tonelux EQ5P is a discrete parametric equalizer with some very unusual features. One thing you'll notice is that the panel has no "Q" control. The filter Q control works in relation to the Boost and Cut control, using a constant energy curve or "proportional Q," which keeps the bandwidth wider at lower boost/cut levels, and becomes narrower at higher boost/cut levels. The results are more musically pleasing than other designs. The curve is identical to many classic equalizers and is one of the reasons the classics are preferred over newer designs. When the Peak button is pressed, 3 yellow peak buttons keep the width at a constant 1/3 octave for precision control.

The high-frequency section has a shelving button instead of a peak button. Since the constant energy curve is so broad in the lower frequencies, there is no need for a low frequency shelf button.

With control for 4 bands, the frequency range of the lower 2 are slightly different, allowing the lowest band to go down to 16Hz, while the upper 2 bands are identical. The In button is a silent In/Oout button that does not bypass the unit, but it bypasses the filters.

The "Input" of the V4 is the normal EQ input at a +4 dBu level. The "Insert Return is a padded input, making the nominal level +10 instead of +4. This can be used when the input level going into the EQ is too hot.
Open Box Tonelux EQ5P All-Discrete 4-band EQ Level 1
Open Box Tonelux EQ5P All-Discrete 4-band EQ Level 1

collapse expand iconFeatures

Proportional Q" keeps bandwidth wider at lower boost/cut levels, narrower at higher boost/cut levels.

Featured Articles