Videos (1)

View Allarrow icon
View Videoplay button

View Video

Radial Engineering

collapse expand iconDescription

The Radial X-Amp Active Reamplifier device provides a 100% Class-A signal path with 2 outputs to drive 2 amps. Has an input level overload LED indicator, an isolated output to eliminate ground loops, and a variable output level control.
Radial Engineering X-Amp Active Reamplifier
Radial Engineering X-Amp Active Reamplifier
Radial Engineering X-Amp Active Reamplifier

collapse expand iconFeatures

  • Active reamping device
  • 100% Class-A signal path
  • Two outputs to drive two amps
  • Input level overload LED indicator
  • Isolated output eliminates ground loops
  • Variable output level control
warning

WARNING: This product can expose you to chemicals including Titanium dioxide (airborne, unbound particles of respirable size), which is known to the State of California to cause cancer, and Lead, which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

collapse expand iconSpecs

  • Input (XLR connector): Balanced 600 ohm, +4dB Line level, AES standard Pin-1 hot
  • Input level: +4dB balanced line level
  • Input impedance: 600 Ohms
  • Out-1 (1/4" connector): Unbalanced 10kOhm guitar signal, direct coupled
  • Out-2 (1/4" connector): 10k-Ohm guitar signal, transformer isolated
  • Output level: continuously variable
  • Output impedance: 5K-Ohms
  • Audio signal path: 100% discreet component Class-A circuit
  • Dynamic range: >100dB
  • Power requirement: 15VDC 400mA - center positive
  • Construction/finish: 14-gauge steel chassis & shell/baked enamel finish
  • Size: 3-5/16"W x 5"L x 1-7/8"D (84mm x 127mm x 48mm)
  • Weight (boxed): 2.6lb (1.8kg)
  • Warranty: 3 years limited (see owner's manual for details)

collapse expand iconWarranty

90 day warranty on footswitch and tubes. One year warranty on all other products.

Featured Articles