Radial Engineering

collapse expand iconDescription

The BT-Pro V2 is a Bluetooth-enabled direct box that enables your mixing board to make a direct wireless connection to smartphones, tablets, and other mobile devices. With a pair of balanced analog audio outputs to feed a PA system, you’re ensured professional audio quality across the board, as you’d expect from Radial. No more consumer-level cables or cobbled together adapters. Each BT-Pro V2 has a unique identifier, allowing multiple units to be used within the same building. The BT-Pro V2 can also be powered via 48V phantom from a mixing console.
Open Box Radial Engineering BT-Pro V2 Stereo Bluetooth Direct Box Level 1
Open Box Radial Engineering BT-Pro V2 Stereo Bluetooth Direct Box Level 1

collapse expand iconFeatures

  • Wirelessly connect smartphones and tablets to a mixer
  • Bluetooth reception of up to 30 meters (100ft)
  • Dual balanced XLR outputs feed the PA system
  • Powered via external supply or 48V phantom power
  • Unique device ID allows multiple BT-Pro’s in a single location

collapse expand iconSpecs

Electronics
  • Audio circuit type: Bluetooth A2DP transceiver with audio line drive
  • Frequency response: 20Hz to 20KHz
  • Dynamic range: 90dB
  • Total harmonic distortion: 0.05%
  • Output Impedance: 150Ω
  • Signal to Noise: 90dB
  • Bluetooth Compliance: Bluetooth 5.0
  • Data Compression: SBC Codec
  • Data Compression: All Bluetooth A2DP compliant devices
Features
  • Mono Sum, Ground lift, Level Control, Headphone
  • Input Connectors: Bluetooth 5.0, Device range up to 100'
  • Output Connectors: XLR-M, 3.5mm TRS Headphone
  • Extras: Included power supply
General
  • Construction: 14 gauge steel outer shell, molded nylon insert
  • Finish: Durable powder coat
  • Size (L x W x D): 3.3” X 5” X 2” (84 x 127 x 51mm)
  • Weight: 1.1lbs (500g)
  • Power: USB-C connector (Power Only) or 48V Phantom
  • Conditions: For use in dry locations only between 5°C and 40°C
  • Warranty: Radial 3-year, transferable

Featured Articles