Gear SpecialistBundlingMusician
Call 866‑388‑4445 or chat for exclusive deals, plus save on orders of $199+
Open Box Galaxy Audio ECM HEADSET WIRELESS SYSTEM Level 1 L
(0)|Q&A|Item #:H72724004001000
Condition: Open Box - Like New
Save on orders $199+ and get expert advice from a Gear Adviser
Need Help?
Description
The ECM Headset Wireless System includes the ECMR Receiver and MBP52 Body Pack with 52HS Head Set Microphone
The ECMR Wireless Receiver
The ECMR Wireless Receiver is an economical solution to a great wireless microphone system. The ECMR has 16 selectable channels, IR Sync, Diversity Antennas mounted to the front of the rugged plastic casing.
HH52 / MBP52 Wireless Transmitters
The ECMR can be used and will sync with either the HH52 or MBP52 transmitters. The HH52 has a gain control and an on/off switch. Both transmitters are powered by 2AA batteries. The MBP52 body pack transmitter has a 0/-10/Mic selector switch.
52HS Head Set Microphone:
The 52HS has a unidirectional pickup pattern to reduce feedback and a wide frequency response of 50Hz-18kHz for full-range vocal reproduction.
The ECMR Wireless Receiver
The ECMR Wireless Receiver is an economical solution to a great wireless microphone system. The ECMR has 16 selectable channels, IR Sync, Diversity Antennas mounted to the front of the rugged plastic casing.
HH52 / MBP52 Wireless Transmitters
The ECMR can be used and will sync with either the HH52 or MBP52 transmitters. The HH52 has a gain control and an on/off switch. Both transmitters are powered by 2AA batteries. The MBP52 body pack transmitter has a 0/-10/Mic selector switch.
52HS Head Set Microphone:
The 52HS has a unidirectional pickup pattern to reduce feedback and a wide frequency response of 50Hz-18kHz for full-range vocal reproduction.
Features
ECMR Reciever
- :
- 16 swelectable channels
- 200' range
- UHF frequency
- Diversity antennas
- Output volume control
- AF level indicator
- IR sSync
- Squelch adjustment
- XLR / ¼" outputs
- Rugged plastic casing
- :
- IR Sync
- Mic/0/-10dB
- 2 AA batteries
- 3-position switch
- Low-battery indicator
- 2.8 oz. (80 g)
- :
- Unidirectional headset microphone
- Freq. Response: 50Hz-18kHz
Specs
ECMR Reciever
- :
- Audio Output Level: (+/-30KHz deviation, 1KHz tone) XLR connector (into 600 ohm load) -12dBV ¼" connector (into 3k ohm load) -18dBV
- Output Impedance: XLR connector 200Ohms ¼" connector 1KOhms
- XLR output: Impedance balanced
- Pin1ï¼Ground (cable shield)
- Pin2ï¼Audio
- Pin3ï¼No Audio
- Sensitivity: -93dBm for 30dB
- Image Rejection: >90dB
- Dimensions: 1-3/4" x 9-1/4" x 4-3/4"
- (44.45mm H x 235mm W x 121mm D)
- Weight: .85 lb. (.39kg)
- Power Requirements: 13.5 V dc at 300mA, supplied by external power supply.
- :
- Max audio input level: 0dBV to +10dBV
- Gain adjustment range: 20dB
- Input impedance: 5k ohm
- Dimensions: 3-5/16" x 2-5/8" x 1" (85mm H x 65mm W x 24mm D)
- Weight: 3.0oz (85 g) (without batteries)
- Power requirements: 2 AA batteries (alkaline or rechargeable)
- Battery life: Approx. 8 hours
- :
- Sensitivity: -65 ± 4dB (0dB=1V/UBR 1kHz)
- Frequency response: 50 Hz-18kHz
- Output impedance: 2k ohm max. (RL-2.2k ohm)
- Directionality: Unidirectional
- Working voltage range: 1 10V
- Standard working voltage: 3V
- Current Consumption: 250UA (Max.)
- Maximum input sound pressure: 110dB SPL
- S/N ratio: >38dB