Gear SpecialistBundlingMusician
Call 866‑388‑4445 or chat for exclusive deals, plus save on orders of $199+
Art ProChannel II Channel Strip
(4)|Q&A|Item #:1330097659729 POS #:107742793
6-month special financing^ + $45 back in Rewards** Limited time Learn More
Lease-To-Own Purchase OptionsLearn more
Order it today! This item is backordered, but you can save your place now so you don’t miss it when it’s back in stock. You won’t be charged until it ships.
Notify me when this item is in stock.
Protect your gearLearn more
Cover drops, spills or cracks with Pro Coverage
Save on orders $199+ and get expert advice from a Gear Adviser
Need Help?
Description
The ART Pro Channel II uses second-generation discrete Class-A microphone preamp to provide clean, quiet gain while maintaining incredible transparency. A powerful dynamics processor subtly controls transients and noise of the most demanding sources.
The ART Pro Channel II's semi-parametric EQ offers wide tune-ability and can be patched before or after the dynamics processor. Separate rear-mounted insert points allow patching in external signal processing gear immediately after the Mic preamp and before the EQ and dynamics processor. Both analog and LED meters provide a detailed indication of audio levels.
The ART Pro Channel II's semi-parametric EQ offers wide tune-ability and can be patched before or after the dynamics processor. Separate rear-mounted insert points allow patching in external signal processing gear immediately after the Mic preamp and before the EQ and dynamics processor. Both analog and LED meters provide a detailed indication of audio levels.
Features
- Variable input impedance for flexible microphone voicing
- Selectable plate voltage
- Large VU meters
- Backlit function switches
- Discrete class-A input microphone preamplifier
- Low-noise at lower gain settings
- Extremely low total harmonic distortion (THD)
- Wide frequency response
- Additional front mounted instrument input jack
- Supports mid/side miking technique
- Operates at +4dbm/-10dbv output
- Selectable stereo/dual operation of output controls
- Automatic instrument input selection
Specs
Input Impedance
- Mic: 150 to 3.4K Ohms, variable
- Instrument: 2.5M Ohms
- Preamp Insert: .5K Ohms
- Balanced Output: 600 Ohms balanced
- Unbalanced Output: 300 Ohms
- Insert Outputs: 300 Ohms
- Analog In to Analog Out: 12Hz to 100kHz +0, -1dB
- THD @ 1kHz: <0.15% typical
- THD @ to to 20kHz: <0.033% typical
- Mic/Line: -128dBu, Input shortened, Max gain, "A" weighted
- Instrument: -109 dBu, Input shortened, Max gain, "A" weighted
- Mic: +18dBu balanced
- Instrument: +15 dBu
- Maximum Gain
- Mic: 70dB (XLR to balanced output)
- Instrument: 64 dB (1/4" to balanced output
- Balanced: +24 dBu
- Unbalanced: +20 dBu
- Output Level At Meter 0 VU: +4 dBu/-10dBV
- Microphone Gain: 0 dB to +56 dB
- Instrument Gain: +3 dB to +50 dB
- Low Cut Filter: 0 - 250 Hz, 1-pole, 6 dB/Octave
- Boost/Cut: +/- 12 dB on each band
- Low Freq. Tuning: 40 / 120 Hz Selectable
- MID 1 Freq. Tuning: 20 Hz to 2 KHz continuously variable
- MID 2 Freq. Tuning: 200 Hz to 20 KHz continuously variable
- High Freq. Tuning: 6 KHz / 18 KHz Selectable
- Attack Time: 250 uSec. to 100 mSec.
- Release Time: 00 mSec to 3 Sec.
- Compression Ratio: 2:1 to 30:1
- Dimensions (WxHxD): 19 x 3-1/2 x 9-3/16"
- Weight: 11 lb
- Power Requirements: USA - 105 to 125 VAC/ 60Hz
- Export units configured for country of destination.
Warranty
In general - one year warranty for equalizers, power conditioners, and personal processors.
3 year warranty for TPS, DPS, and studios.
5 year warranty for pro gear.
Check with manufacturer for specific product warranty.
3 year warranty for TPS, DPS, and studios.
5 year warranty for pro gear.
Check with manufacturer for specific product warranty.