A dual mono tube DI that is warm quiet and has a 5-position high pass shelf EQ,

View all items from this brand

The Manley Dual Mono Tube Direct Interface offers the flexibility that allows the user to create stereo recordings or simultaneously go direct with two separate instruments. This outstanding DI Box features exceptionally clean and quiet tube circuits, which will warm up any electric guitar, bass, violin, and especially those sterile sounding synths. Unique with the Manley Tube DI is the added 5-position high pass shelf EQ, there to fight unwanted resonances. As a splitter device, the transformer-coupled balanced XLR output can be sent directly to a mic level input, such as through your console channel, while the 1/4" output drives the guitar amplifier cabinet, which can be miked and mixed with the direct feed. Low impedance outputs, Ground lift and Console Out Boost switches make the Manley DI Box both versatile and compatible. It turns that noisy high impedance guitar cable into quiet lo-Z territory fast! Keep your Manley Dual Mono DI close at hand to solve a variety of studio problems and improve the quality of your recordings.

Manley Dual Mono Tube Direct Interface Features:

Type: Dual Mono All Tube Direct Interface
Vacuum Tube: 5751
Gain: -6dB or -26dB
Input Z: 10 Mohm to 1 Mohm
Output Z: 150 ohm xfmr
Frequency response: 12 Hz – 15KHz (-3dB)
EQ: LF rolloff -3dB points: 12, 42, 100, 250Hz
Transformer-Coupled Balanced XLR Output
Console Out Boost Switch
Ground Lift Switch
Factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage.
Operating Mains Voltage changeable with power transformer re-wiring and fuse value change.
Mains Voltage Frequency: 50~ 60Hz
Mains power consumption Mono Tube DI:
0.050 Amps (50 milliamps = 50mA) @ 120V = 6 Watts
0.025 Amps (25 milliamps = 25mA) @ 240V = 6 Watts
Mains power consumption Stereo Tube DI:
0.0750 Amps (75 milliamps = 75mA) @ 120V = 9 Watts
0.0375 Amps (37.5 milliamps = 37.5mA) @ 240V = 9 Watts