Accidental damage, normalNormal wear and power surges are no longer an issue with these comprehensive and affordable plans. We even pay to ship your gear for repairs. More details.
Covers much more than the original manufacturer's warranty:
Damage due to unexpected and unintentional spills, drops and impacts
Damage due to normal wear and tear
Damage caused by lightning/power surge
Damage due to dust, internal heat, humidity, heavy usage
No Lemon Policy on merchandise over $200- if it fails for the same reason 3 times, it is replaced on the 4th breakdown
Complete refund in the event of failure or substandard performance on merchandise under $200 (Gift Certificate sent for the full price plus applicable sales tax paid)
Manufacturer's Specs Coverage -- The product does not need to fail to be covered. If the product does not perform as it did the first day you bought it, we will repair or replace it so that it does
Free shipping to and from repair facility
Plans are transferable in the event merchandise is sold
Limit of Liability: The least of the cost of (1) authorized repairs, (2) replacement with a product of similar features, (3) reimbursement for authorized repairs or replacement or (4) the price that you paid for the product.
*Limitations and exclusions apply. See terms and conditions for program details
The sixQ2 studio channel from Joemeek brings outstanding audio quality to both project and professional studios. Designed around a transformer-based mic input, musical three-band EQ and the classic Joemeek optical compressor, the sixQ2 gives you full vintage vibe plus the ability to output 24-bit/96kHz digital audio to your DAW via S/PDIF or optical connectors. It’s the perfect way for project studios to add some major sonic muscle and for larger studios to offer a broader range of options to customers.
Joemeek Q series studio channels provided ultra-clean, world-class mic pres combined with amazingly musical EQ, built-in high-quality digital converters, a unique ‘IRON’ transformer-coupling switch to add some special sonic coloration and the famous Joemeek optical compressor. The Q2 series offers several upgrades from the original spec with a new top-quality Cinemag mic transformer, more headroom, and the ability to route the line input through the mic transformer for the type of euphonic effects that only come from finely tuned audio components.
Joemeek SixQ2 1U Single Channel Strip
Features:
Ultra-clean microphone preamplifier with Cinemag transformer “Iron” switch sends line input through mic transformer to add color and vintage vibe Highly musical 3-band EQ with sweepable lows and mids Full-featured optical compressor from vintage smooth to completely over the top dynamics effects Balanced and unbalanced I/O to interface with any system 24-bit/96kHz digital converters with both optical and S/PDIF connections
Joemeek SixQ2 1U Single Channel Strip
Specifications:
Input impedances: Mic: 1.2kohm; Line: 10kohm Pre-amp overall gain: -2dB to 60dB (variable) Common mode rejection: 70dB Equivalent input noise: -128.5dBu (unweighted) Distortion: 0.001% (below Compressor threshold) Frequency response: 10Hz to 70kHz (-3dB) Maximum input before clipping: Mic: +24dBu; Line: +45dBu Headroom before clipping: +29dBu Compressor threshold: -6dBu to +22dBu (variable) Compressor ratio: 1:1 to 10:1 (variable) Compressor attack time: 1 msec to 100 msec (adaptive) Compressor release time: 0.1 sec to 3 sec (adaptive) Nominal output levels: +4dBu/-10dBv Output impedance: 75ohm Output Level switch: 12dB attenuation Noise Floor: -85dBu (typical, with ~40dB mic gain) VU Meter: Analog movement Power supply: 115V / 230V ac mains, 50/60Hz Power consumption: 30W Mechanical: 19x3.5x8.66” (overall) Weight: 6.5 lb High Pass Filter: 12dB per octave cut below 80Hz EQ Boost & Cut: +/-15dB (zero phase-shift bell response) LF Frequency : 40Hz to 650Hz variable Mid Frequency : 300Hz to 5kHz variable HF Frequency : 6kHz/12kHz switchable EQ “Q” 0.9 (1.6 octaves Digital Output Specifications Sampling: 24 Bit Resolution: 24-bit delta sigma using Wolfson WM8738 ADC Sampling Rate: 44.1kHz, 48kHz, 88.2kHz or 96kHz selectable Output Formats: S/PDIF electrical, S/PDIF Optical Noise Floor: typically 92dB A-weighted (referenced to 0dBFS = +18dBu). So for a +4dBu signal, the SNR is 78dB Distortion: typically 0.01% @ 0dBu (20Hz - 20kHz) at 96kHz sample rate, 0.02% @ 0dBu (20Hz - 20kHz) at 48kHz sample rate and 0.02% @ -1dBFS (20Hz - 20kHz) at all sample rates Crosstalk: typically -67dB (20Hz - 20kHz)
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
Accidental damage protection (new gear only)
Expedited Repair
Free Shipping (for returns or repairs)
100% Coverage for Commercial Use
Extended Return Period
Extended Price Protection
No Lemon Guarantee
Free Transfer of Coverage to a new owner
Repair Costs Covered for up to 3 years from date of purchase
Repairs Can Be Authorized Toll-Free by Phone or the via the web
You must be logged in to write a review. Please click here to login.
Browse similar items:
Product Details
Customer reviews
Price
You are currently viewing the Printable Version of this page. Click here to return
to the Regular Version.
866-498-7882
Available in Stores
For your convenience, our online inventory has been expanded to include items in
our retail locations. Some items may be fulfilled from Guitar Center retail stores*.
Items will be inspected to ensure the store has the product you want, in the condition
you expect. If not, a store manager will contact you by phone or email within one
hour.
*Select items are available for in store pick-up only
