Gear SpecialistBundlingMusician
Call 866‑388‑4445 or chat for exclusive deals, plus save on orders of $199+
DPA Microphones 2011ER Twin Diaphragm Cardioid Microphone with Rear XLR Cable
Q&A|Item #:1500000129113 POS #:113570949
6-month special financing^ + $109 back in Rewards** Limited time Learn More
Lease-To-Own Purchase OptionsLearn more
This item is backordered but is available to reserve now. You will not be charged until the item ships.
Notify me when this item is in stock.
Protect your gearLearn more
Cover drops, spills or cracks with Pro Coverage
Save on orders $199+ and get expert advice from a Gear Adviser
Need Help?
Description
The 2011ER Twin Diaphragm Cardioid Mic from DPA Microphones is a directional microphone with a well-balanced, distinctive sound. It bridges the gap between the extreme sound quality of DPA's pencil microphones and their well-known Lavalier microphones. The double-diaphragm, one-capsule composition combines the advantages of small capsules with the lower inherent noise achieved from a larger diaphragm area. These capsules provide fast impulse response and large frequency bandwidth.
Features
- Blends clarity, richness and dynamics
- Twin diaphragm capsule technology
- Advanced interference tube technology
- Superb stage separation and level control
- Modular flexibility
Specs
- Directional pattern: Cardioid
- Principle of operation: Pressure gradient, with interference tube
- Cartridge type: Pre-polarized condenser, twin diaphragm capsule
- Frequency response: 20Hz-20kHz
- Effective frequency range: ±2 dB, at 30 cm (11.8 in) 50 Hz - 17 kHz with 3 dB soft boost at 12 kHz
- Sensitivity: Nominal, ±2 dB at 1 kHz 10 mV/Pa; -40 dB re. 1 V/Pa
- Equivalent noise level: A-weighted Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A))
- Equivalent noise level: ITU-R BS.468-4 Typ. 33 dB (max. 36 dB)
- Cable drive capability: 328 ft.
- Output balance principle: Impedance balancing
- Common mode rejection ratio (CMRR): > 40 dB
- Power supply (for full performance): P48 (Phantom Power)
- Current consumption: 3.5 mA
- Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Color: Matte black
- Weight 24 g (0.8 oz)
- Microphone diameter: 0.75 in.
- Microphone length: 2.0 in.
- Maximum output voltage: RMS 2.2 V
- Polarity: +V at pin 2 for positive sound pressure
- Sensitivity selection tolerance (at 1 kHz): ±1.5 dB