Gallery
Description
Features
Specs
Reviews
Q&A

collapse expand iconDescription

The BSS Audio FCS-960 is a 30-band graphic equalizer featuring Dual Mode switching between Normal and Fine filter width settings on each channel.

The FCS-960 provides 2 channels in 3U of rack space. Constant Q-filters with filter-bypass center taps are controlled by high grade, 45mm faders with molded polymer fader knobs that eliminate visual parallax error even under low light conditions.

Also included are sweepable/switchable Hi-pass filter, Gain control and electronic balanced inputs and outputs.
BSS Audio FCS-960 Graphic Equalizer
BSS Audio FCS-960 Graphic Equalizer

collapse expand iconFeatures

  • Long 45mm fader travel for precise adjustment and control
  • Center detented fader with electrical center tap for true 0dB setting
  • Advanced constant Q filter topography for improved accuracy at all fader settings and excellent sonic transparency. Selectable normal or fine filter response
  • Continuously variable high pass filter, with by-pass switch
  • Gain control fro system loudness normalization
  • Peak clip LED to give advance warning of signal overload
  • Channel bypass selection and power fail bypass by relays
  • Electronically balanced inputs and outputs
  • Proprietary design fader knob provides positive feel with ample finger room, virtually eliminates visual parallax errors even under low ambient light conditions
warning

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

collapse expand iconSpecs

Input Section
  • Impedance: 10k Ohm, Electronically Balanced:
  • Max. Input Level: +20dBu
  • Connector: XLR331 or equivalent
Output Section
  • Output: Electronically Balanced & floating
  • Max. Output Level: +20dBu into 600 Ohms
  • Connector: XLR332 or equivalent
System Performance
  • Frequency Response: +/0.25dB 20Hz to 20kHz
  • Distortion (THD): <0.005% 20Hz to 20kHz @+4dBu
    Output Noise (flat): <90dBu, 22Hz to 22kHz, unweighted
    Channel Separation: Better than 80dB from 20Hz to 20kHz
  • Gain Control Range: +/10dB
  • Peak Indicator: +18dBu
  • Bypass:Passive failsafe bypass relay
Filters
  • Type: MFB Constant Q
  • Frequencies Per Channel: 30 off, on 1/3 octave ISO centres, 25Hz to 20kHz
  • Boost/Cut Range: Nominal +/10dB *
  • Mode: Selectable normal or fine response
  • High Pass Filter: 18dB/octave Butterworth, 20Hz to 250Hz
General
  • Power Requirements: AC 30VA 50/60Hz, selectable 90/120v or 190/250v. IEC AC power cord.
  • Dimensions: 3U 19 " x 5.25" x 8.9" (482mmx132mmx227mm)
  • Weight: 11lbs gross shipping (6kg)