Gallery
Description
Features
Specs
Reviews
Q&A
Audix

collapse expand iconDescription

The M1250B, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1250B, which is equipped with a cardioid capsule, is also available with hypercardioid, omni or shotgun capsules, giving the microphone the unique ability to be used in a wide variety of live, studio and broadcast applications.
The M1250B is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.

Audix M1250B Miniaturized Condenser Microphone Hypercardioid Standard
Audix M1250B Miniaturized Condenser Microphone Hypercardioid Standard

collapse expand iconFeatures

  • Small, lightweight, low profile
  • Miniaturized integrated preamp circuitry
  • No external power adapter needed
  • 12 mm gold vapor diaphragm
  • Immune to RF interference
  • Extremely low noise, high SPL handling
  • Available with a cardioid, hypercardioid, omni, or supercardioid capsule
    • Supplied accessories:
    • 25' cable with mini-XLR (female) - XLR (male) connectors (CBL-M25)
    • Mic stand adapter (MC-MICRO)
    • Hanging clip (MC-HANGER)
    • External foam windscreen (WS1218)
    Applications
    • Overhead mic for choir, group vocal
    • Acoustic instruments
    • Ambient room miking
    • Symphonic area miking
    • Speech, presentation
    • Cymbals, percussion

    collapse expand iconSpecs

    • Transducer type: condenser
    • Frequency Response: 50 Hz - 19 kHz
    • Polar pattern: cardioid, hypercardioid, omni, supercardioid
    • Output Impedance: 150 ohms
    • Sensitivity: 10 mV / Pa (C) @ 1k; 10 mV / Pa (HC) @ 1k; 11 mV / Pa (O) @ 1k
    • Signal/Noise Ratio (A-weighted): 73 dB
    • Equivalent noise level (A-weighted): 21 dB
    • Maximum SPL @ .5% THD: ?140 dB
    • Dynamic Range: 119 dB
    • Power requirements: 18 - 52 V
    • Connector: 3 pin mini-XLRm
    • Polarity: positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
    • Housing: machined brass
    • Finish: powder coat
    • Weight: 0.7 oz / 20 grams
    • Length: 2.1 inches / 54 mm