Apogee

collapse expand iconDescription

With the recently released Monitor Workflows functionality, the 16x16 SE-equipped
Symphony I/O from Apogee is the plug-and-play solution to get started with Dolby Atmos and
other Immersive Audio systems. Best of all, the SE conversion adds dimension to the
added dimension of your multi-speaker monitoring setup.

More Than Just a Simple Upgrade
The 16x16 SE features the most advanced audio specifications of any Apogee
Interface. Greater dynamic range and a lower total harmonic distortion makes
for enhanced purity and musicality in your listening experience.

A Difference You Can Hear
After the A/D and D/A conversion stages, the most crucial section of your audio
interface is the analog output driver stage—the connection to your mixing and
monitoring systems. The 16x16 SE’s ultra-robust output driver stage preserves the
integrity of your audio regardless of cable length or input stage anomalies of the
downstream devices.

20% More Efficient
In a masterful feat of electrical engineering, the 16x16 SE I/O module has fewer parts
than its predecessor while also running about 20% more efficiently. That means a
cooler running interface, even with a fully loaded 32x32 Symphony I/O chassis.

Possible Configurations with 16X16SE 
Symphony I/O MkII with Thunderbolt Connectivity
Symphony I/O MkII - 16X16SE
Symphony I/O MkII - 32X32SE
Symphony I/O MkII - 16X16SE - Connect-8
Symphony I/O MkII - 16X16SE - 2X6SE
Symphony I/O MkII with Pro Tools HD Connectivity
Symphony I/O MkII - 16X16SE - PTHD-PLUS
Symphony I/O MkII - 32X32SE - PTHD-PLUS
Symphony I/O MkII - 16X16SE - Connect-8 - PTHD-PLUS
Symphony I/O MkII - 16X16SE - 2X6SE - PTHD-PLUS
Symphony I/O MkII with Pro Tools HD + Dante Connectivity
Symphony I/O MkII - 16X16SE - Dante-Card
Symphony I/O MkII - 32X32SE - Dante-Card
Symphony I/O MkII - 16X16SE - Connect-8 - Dante-Card
Symphony I/O MkII - 16X16SE - 2X6SE - Dante-Card
Symphony I/O MkII with Thunderbolt and Pro Tools HD + Dante Connectivity
Symphony I/O MkII - 16X16SE and Dante-Card
Symphony I/O MkII - 32X32SE and Dante-Card
Symphony I/O MkII - 16X16SE - Connect-8 and Dante-Card
Symphony I/O MkII - 16X16SE - 2X6SE and Dante-Card
Apogee 16X16 Analog I/O Module (2-CH SPDIF)

collapse expand iconFeatures

  • 16 Analog Inputs and Outputs on 4 DSub Connectors
  • Stereo S/PDIF Coax I/O
  • Improved Analog Output Stage
  • Improved Power Efficiency

collapse expand iconSpecs

  • Analog to Digital Specifications
  • THD+N: -115dB @ 23dBu (0.00018%) unweighted
  • Dynamic range: 124dB A weighted
  • Maximum input levels:
  • +4dB setting: +24dBu
  • -10dB setting: +10dBV
  • Frequency response at 44.1kHz: 1-20,000 Hz (+/- 0.05dB)
  • Input impedance: 10K
  • Digital to Analog Specifications
  • THD+N: -119dB @ 21dBu (0.00012%) unweighted
  • Dynamic Range: 128dB A weighted
  • Max output levels – ∞ to +24dBu
  • Frequency response at 44.1 kHz: dc to 20kHz (+/- 0.05dB)
  • Output impedance: 50 Ohm

collapse expand iconWarranty

Hardware warranty:

APOGEE ELECTRONICS CORPORATION warrants this product to be free of defects in material and manufacture under normal use for a period of 12 months. The term of this warranty begins on the date of sale to the purchaser. Units returned for warranty repair to Apogee or an authorized Apogee warranty repair facility will be repaired or replaced at the manufacturer's option, free of charge.

All units returned to Apogee or an authorized Apogee repair facility must be prepaid, insured and properly packaged. Apogee reserves the right to change or improve design at any time without prior notice. Design changes are not implemented retrospectively, and the incorporation of design changes into future units does not imply the availability of an upgrade to existing units.

This warranty is void if Apogee determines, in its sole business judgment, the defect to be the result of abuse, neglect, alteration or attempted repair by unauthorized personnel.

The warranties set forth above are in lieu of all other warranties, expressed or implied, and Apogee specifically disclaims any and all implied warranty of merchantability or of fitness for a particular purpose. The buyer acknowledges and agrees that in no event shall the company be held liable for any special, indirect, incidental or consequential damages, or for injury, loss or damage sustained by any person or property, that may result from this product failing to operate correctly at any time.

USA: Some states do not allow for the exclusion or limitation of implied warranties or liability for incidental or consequential damage, so the above exclusion may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

Software warranty:

Limited Warranty. Apogee Electronics warrants for a period of ninety (90) days from your date of purchase that (i) the media on which the Software is recorded will be free from defects in materials and workmanship under normal use, and (ii) the Software as provided by Apogee Electronics will substantially conform to Apogee's published specifications for the Software.

Apogee Electronics' entire liability and your sole and exclusive remedy for any breach of the foregoing limited warranty will be, at Apogee Electronics' option, replacement of the media, refund of the purchase price or repair or replacement of the Software.

THIS LIMITED WARRANTY IS THE ONLY WARRANTY PROVIDED BY APOGEE ELECTRONICS AND ITS LICENSORS EXPRESSLY DISCLAIM ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WITH REGARD TO THE SOFTWARE AND ACCOMPANYING WRITTEN MATERIALS. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION

Featured Articles