A totally modern, hybrid version of the famous SVT.
This Ampeg Half Stack includes the SVT-3PRO Series amp head and the SVT-410HLF Classic Series bass cabinet.
The tube preamp section of the Ampeg SVT-3PRO Series Head re-creates the great bass tone that made the original SVT the most respected bass amp of all time. The power section is tube-driven solid state with a toroidal transformer that generates less noise and magnetic interference. Delivers 450W @ 4 ohms and has an arsenal of tone-shaping tools: 3 bands of tone, a 5-position mid selector, 9-band graphic EQ, plus low and high boosts. Other pro features include input peak LED, input pad and bright switch, mute function, tuner out, variable line-out level, time-delayed turn on, DC-supplied filaments, and variable fan speed. 2U rackmount.
The Ampeg SVT-410HLF Enclosure gives you plenty of volume and clean low end. This 4x10" cabinet has the same speakers and 1" horn as the SVT-410HE with 2" coils and 30 oz. magnets, but the cabinet itself is tuned differently. It's deeper and has a bottom port that results in better low-end response, down to 28Hz!
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Ampeg SVT Bass Amp Half Stack Features:
- SVT-3PRO Series amp head
Tube preamp section re-creates great bass tone of the original SVT
450W @ 4 ohms
3 bands of tone
5-position mid selector
9-band graphic EQ
Low and high boosts
Input peak LED
Input pad and bright switch
Mute function
Tuner out
Variable line-out level
Time-delayed turn on
DC-supplied filaments
Variable fan speed
2U rackmount
Ampeg SVT Bass Amp Half Stack Specifications:
- SVT-3PRO Series amp head
Dimensions: 19"W x 3-1/2"H x 15-1/2"D
Weight: 26 lb.
RMS Power Output (8 ohms): 275
RMS Power Output (4 ohms): 450
RMS Power Output (2 ohms): n/a
Tone Controls: 3 band
Mid Tone Control: 5 pos.
Graphic EQ: 9 band
Ultralow/High Boosts: Yes
Balanced Line Out: Yes (Transformer)
Effects Loop: Yes
Preamp Out/Power Amp In: Yes
SVT-410HLF Classic Series bass cabinet
30"W x 24"H x 19"D
110 lb.
Ampeg SVT Bass Amp Half Stack
On May 1st, 2009, the Mackie, TAPCO, Crate, Blackheart and Ampeg websites will be updated with the addition of warranty URLs (e.g. www.mackie.com/warranty) expressing new A Stock warranty terms. These warranty URLs will go live on May 1st, 2009. Formerly, warranty periods for these LOUD brands appeared in a variety of locations – in product manuals (for Mackie and TAPCO) and on warranty cards and hang tags (for Crate, Blackheart and Ampeg). In order to streamline and clarify this process, Mackie, TAPCO, Crate, Blackheart and Ampeg warranty periods and terms will be communicated in full on the warranty pages.
Any LOUD products purchased prior to May 1st will bear with them the manufacturer’s warranty as predates the new policy. Moving through this transition, in order for customers to obtain warranty service, both the sales receipt and a physical copy of the (older) warranty statement will be required by our Service and Support departments in order to issue Service Requests, etc. If the product was purchased on or after May 1st, 2009, but a physical copy of the older warranty terms is not presented, the new warranty terms and periods will apply. Meanwhile, the products that bear with them the new warranty periods (as reflected in the box contents of each product) are being tracked by serial #, and contain new warranty content referring customers to the appropriate brand website.
The information below reflects the product warranty periods that will be effective on May 1st, 2009 for the Mackie, TAPCO, Crate, Blackheart and Ampeg brands:
Mackie:
A 3-year, nontransferable, inclusive warranty on electronics and a 2-year, nontransferable, inclusive warranty on drivers (where applicable) apply to loudspeakers (active and passive), power amps, powered mixers, and HR studio monitors. Specific models under this warranty include all SRM, HD, SA, C and S Series Speakers, all FRS Amplifiers, all HRmk2 Studio Monitors.
A 1-year, all inclusive, nontransferable warranty applies to all mixers, MR Studio Monitors, Control Surfaces, Processors (digital), MR Studio Monitors, Control Surfaces, Audio/MIDI Interfaces, other SR & Recording Products. Specific product models under this warranty include all Onyx Compact, 4-bus and 8-bus, all VLZ3, all PPM, all ProFX, all CFXmk2 Mixers, all MR Studio Monitors, Big Knob, Onyx 800R, all MCU Pro family.
Tapco:
A 1-year, all inclusive, nontransferable warranty applies to all products and all models.
Crate:
A 1-year, nontransferable warranty applies to electronics and speakers on all models of MI amps, cabinets, and combos. 90-day warranty on all tubes
Blackheart:
A 1-year, nontransferable warranty applies to electronics and speakers on all models of MI amps, cabinets, and combos. 90-day warranty on tubes.
Ampeg:
A 5-year, nontransferable warranty on electronics and a 2-year, nontransferable warranty on speakers apply to all SVT Classic and Pro Series, MI amps and cabinets. A 2-year, nontransferable warranty on electronics and a 2-year, nontransferable warranty on speakers apply to all B Series, all Diamond Blue, and all BA combo amps. 90-day warranty on tubes.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
- Accidental damage protection (new gear only)
- Expedited Repair
- Free Shipping (for returns or repairs)
- 100% Coverage for Commercial Use
- Extended Return Period
- Extended Price Protection
- No Lemon Guarantee
- Free Transfer of Coverage to a new owner
- Repair Costs Covered for up to 3 years from date of purchase
- Repairs Can Be Authorized Toll-Free by Phone or the via the web
(Based on 
Based on 
