Gear SpecialistBundlingMusician
Audix CX212B Large Diaphragm Condenser Mic Multi-Pattern
(1)|Q&A|Item #:1303337805189 POS #:110173267
Save on orders $199+ and get expert advice from a Gear Adviser
Need Help?
Description
The CX-212B multi-pattern, dual diaphragm condenser microphone is an exceptional tool for professional audio production, project studios and live stage performances. Delivering a smooth, uniform frequency response from 20 Hz - 20 kHz, the CX-212B offers a choice of three polar patterns: cardioid, omnidirectional, and figure 8. Additionally, the CX-212B is equipped with a bass roll-off filter to help eliminate rumble in the lower frequencies.
The CX-212B, for use in sound pressure levels up to 133 dB, is ideal for a wide variety of acoustic instruments, vocals, string sections, ensembles and ambient room miking. The CX-212B, which is designed with discreet low noise preamp circuitry, operates on 48 volts phantom power. For optimum results use the CX-212B with a high quality mic preamplifier and microphone cable.
The CX-212B, for use in sound pressure levels up to 133 dB, is ideal for a wide variety of acoustic instruments, vocals, string sections, ensembles and ambient room miking. The CX-212B, which is designed with discreet low noise preamp circuitry, operates on 48 volts phantom power. For optimum results use the CX-212B with a high quality mic preamplifier and microphone cable.
Features
- Isolation shockmount (SMT-CX112)
- Aluminum carrying case (CASE-CX)
- Studio vocals, lead and backing
- Voice over
- Choir
- Ambient room mic
- Drum overheads
- Orchestra
- Bells, chimes, marimba, vibes
- Acoustic instruments
- Electric guitar cabs
Specs
- Transducer type: condenser
- Capsule technology: 27.5 mm (1.08 in) gold vapor diaphragm
- Frequency range: 20 Hz - 20 kHz
- Polar pattern: Selectable pattern
- Output impedance: 120 ohms
- Sensitivity: 10 mV / Pa @ 1k
- Equivalent noise floor: 19 dB (A weighted)
- Signal to noise ratio: 75 dB
- Power requirements: 48 volts phantom
- Maximum SPL: ‰133 dB / ‰ 148 dB with pad
- Dynamic range: 114 dB
- Cable/connector: 3-pin gold plated male XLR connector
- Polarity: positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Housing: aluminium & zinc alloy
- Finish: black satin
- Weight: 365 g / 12.9 ounces
- Length: 165 mm / 6.5 inches