Accidental damage, normalNormal wear and power surges are no longer an issue with these comprehensive and affordable plans. We even pay to ship your gear for repairs. More details.
Covers much more than the original manufacturer's warranty:
Damage due to unexpected and unintentional spills, drops and impacts
Damage due to normal wear and tear
Damage caused by lightning/power surge
Damage due to dust, internal heat, humidity, heavy usage
No Lemon Policy on merchandise over $200- if it fails for the same reason 3 times, it is replaced on the 4th breakdown
Complete refund in the event of failure or substandard performance on merchandise under $200 (Gift Certificate sent for the full price plus applicable sales tax paid)
Manufacturer's Specs Coverage -- The product does not need to fail to be covered. If the product does not perform as it did the first day you bought it, we will repair or replace it so that it does
Free shipping to and from repair facility
Plans are transferable in the event merchandise is sold
Limit of Liability: The least of the cost of (1) authorized repairs, (2) replacement with a product of similar features, (3) reimbursement for authorized repairs or replacement or (4) the price that you paid for the product.
*Limitations and exclusions apply. See terms and conditions for program details
The ART SLA1 Studio Power Amplifier gives you the level of quality needed for your studio monitoring. With a super-wide frequency response (10Hz-40kHz), thermal-dependent cooling system, extremely low-noise electronics, and low-profile single rackspace design, it's ideal for both project and pro studios. Pair with the SLM-1 passive monitors for a great-sounding, cost-effective monitoring solution! The SLA-1 is rated at 100W rms/channel @ 8 ohms (130W rms/channel @ 4 ohms and 260W/bridged mono @ 8 ohms), hum and noise >100dB, input impedance of 22kOhm unbalanced (44kOhm balanced).
ART SLA1 Studio Power Amplifier
Features:
10Hz-40kHz frequency response 100W per channel @ 8 ohms XLR and 1/4" inputs Gound-lift switch Silent, thermal-dependent cooling system with SmartFan Multi-way binding-post outputs Low-profile single rackspace design Extremely low noise, discrete linear design All-steel chassis
ART SLA1 Studio Power Amplifier
Specifications:
Input sensitivity: 1V for full power output into 8 ohms Stereo output power (8 ohms): 100W RMS per channel Stereo output power (4 ohms): 130W RMS per channel Bridged output power (8 ohms): 260W RMS mono CMMR: >60dB (typical @ 1kHz) Frequency response: 10Hz-40kHz +/-.5dB Hum and noise: >100dB below clipping THD: <.05% (typical) Transformer type: toroidal Input connectors: 2x XLR (balanced), 2x 1/4" TRS (balanced or unbalanced) Output connectors: multi-way binding posts Input impedance: 44k ohms balanced; 22k ohms unbalanced Dimensions: 19"W x 1-3/4"H x 9-1/2"D Weight: 13-1/4 lbs.
In general - one year warranty for equalizers, power conditioners, and personal processors.
3 year warranty for TPS, DPS, and studios.
5 year warranty for pro gear.
Check with manufacturer for specific product warranty.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
Accidental damage protection (new gear only)
Expedited Repair
Free Shipping (for returns or repairs)
100% Coverage for Commercial Use
Extended Return Period
Extended Price Protection
No Lemon Guarantee
Free Transfer of Coverage to a new owner
Repair Costs Covered for up to 3 years from date of purchase
Repairs Can Be Authorized Toll-Free by Phone or the via the web
This amp has loads of great features. One of favorites is the retractable controls. You can push in the volume controls so that they don't move from their positions during performance or while transporting. Plus, there is an additional tamper cover that can be placed over the front that can only be removed with a phillips screwdriver. Same goes with the stereo/mono switch on the back and the ground lift switch. Heavy duty casing...this thing is like a rock! Really bright blue LED on the front shows you've got power and signal meter LED show you've got signal. The only additional feature that would be nice to have is an actual level meter for each channel, but you could find that in higher priced amps.
I was looking for an affordable, single space, light, rack mountable amp to power our stage monitors from our un-powered mixer. After doing a little research I chose the ART Sla1. Upon testing the amp I was very impressed with the headroom and flatness of the sound. I got to use it at an outdoor park venue powering two 15 inch stage monitors very successfully. I tested the amp with two 8 ohm bottoms and a Sansamp Tech 21 with my bass and found it to sound excellent. Bridged, it would probably make a great small venue Bass amp with the right preamp. I feel that this amp would be sufficient to power mains at a small venue with an un-powered mixer without any trouble at all. The only complaint is the lack of 1/4 jacks for the output as your only option is the binding post/ banana plug. Very solid little amp!
2
of
2
people found this review helpful.
Was this review helpful?
Thank You for rating this review!
You must be logged in to write a review. Please click here to login.
Browse similar items:
Product Details
Customer reviews
Price
You are currently viewing the Printable Version of this page. Click here to return
to the Regular Version.
866-498-7882
Available in Stores
For your convenience, our online inventory has been expanded to include items in
our retail locations. Some items may be fulfilled from Guitar Center retail stores*.
Items will be inspected to ensure the store has the product you want, in the condition
you expect. If not, a store manager will contact you by phone or email within one
hour.
*Select items are available for in store pick-up only
(Based on 
Based on 
