[[KeywordSearchInputContent]]

2 days left for two-day holiday shipping

Item # H99897

Print this page

  1. Select the information you'd like to print out.
  2. Cancel
AER AER Colourizer 1 Channel preamp / DI-Cox with Sound Shaping Controls
Use Add to Cart below to have it shipped to you, or to a store near you.
Close
  • Store
  • Availability
Guaranteed Lowest Price
Pickup In Store
GC Shopping Cart
 Cart Contents
Qty Description Price Shipping Subtotal 
      AER AER Colourizer 1 Channel preamp / DI-Cox with Sound Shaping Controls (H99897)
Availability:  


Top quality DI.

The AER Colourizer is a preamplifier for instrument or microphone.Simply insert The Colourizer into the signal chain between source and next point in the audio path (e.g. amplifier or mixing desk ) and your signal will be stronger, richer and more stable. It is an ideal recording companion, and also works well to stabilize your feed to the snake in a live environment. Quiet, clean, and made with a rugged build quality, the Colourizer is designed to give you quiet, clean reliable signal for many years without operational inconsistencies.

AER AER Colourizer 1 Channel preamp / DI-Cox with Sound Shaping Controls Features:

  • Parametric EQ
    Enhancer
    Tone control
    Dead silent
    Built to last


AER AER Colourizer 1 Channel preamp / DI-Cox with Sound Shaping Controls Specifications:

  • Input
    Switchable microphone or line input
    Combo socket, XLR and 1/4“ jack (6.35 mm)
    Line mode (jack input)
    Unbalanced high impedance input for
    instrument pick-ups and line-level sources
    Gain adjustment range: +3...+20 dB
    Min. input voltage: 100 mV (–20 dBV)
    Max. input voltage: 3 V (+10 dBV)
    Input impedance: 2.2 M? "" 150 pF
    Signal-to-noise ratio (A-weighted)
    Min. gain: 104 dB
    Max. gain: 98 dB
    Frequency response: 20 Hz...20 kHz / ?1 dB THD + N (1 kHz): < 0.3%
    Phantom power: Ring contact of line out is
    connected to ring contact of input.
    Any external phantom power applied at the ring of line out will be available at the input.
    mic mode (XLR input)
    Balanced microphone input 1 = ground, 2 = positive (+), 3 = negative (–) Gain adjustment range: +4...+40 dB Min. input voltage: 10 mV (–40 dBV) Max. input voltage: 3 V (+10 dBV) Input impedance: 2.1 k?
    Unbalanced: 1.1 k? Signal-to-noise ratio (A-weighted):
    Min. gain: 104 dB
    Max. gain: 95 dB Frequency response: 20 Hz...20 kHz / ?1 dB THD + N (1 kHz): < 0.1% Phantom power: 24 V, R = 1.2 k? per
    terminal, switchable, total current max. 10
    mA, short circuit protected Warning: External equipment may be
    damaged by inappropriate use of phantom power.
    In case of doubt keep the 24 V phantom power switch off (not pushed).
    Clip indicator Red LED Headroom: 12 dB

    Outputs
    Line out: Unbalanced line output after master
    Mono jack, 1/4” (6.35 mm) Nominal output voltage: 1 V (0 dBV)
    Max. output voltage: 9 V (+19 dBV) Output impedance: 47 ?
    Min. load impedance: 2 k?
    Residual noise (master fully anticlockwise):A-weighted: 1.2 µV (–118 dBV) Balanced XLR output 1 = ground, 2 = positive (+), 3 = negative (–) Level control Nominal output voltage (differential),adjustment range: 41...410 mV (–28...–8 dBV) Output impedance:47 ? each terminal to ground
    Min. load impedance (differential): 1 k?
    Residual noise (both channels in line mode):A-weighted: 2.3 µV (–113 dBV)


Voice your opinion! Be the first to review »
Questions about the AER Colourizer 1 Channel preamp / DI-Cox with Sound Shaping Controls (H99897)


To: GuitarCenter.com
PO Box 4769
Westlake Village, CA 91359
USA
866-498-7882
 
Order #: (if applicable)  * Denotes Required Field
*First Name:
*Last Name:
*Email:
Phone:
*Subject:
*Message:
Click to add file attachment
File Upload 5mb limit