Peavey

collapse expand iconDescription

A two dual-channel crossover incorporating Peavey's legendary low-noise, low-distortion design. The ruggedly contructed PV 23XO gives you the flexibility to manage a two-way stereo system or run in a three-way mono configuration. The PV 23XO has variable-state filter controls with 24dB per octave filters and utilizes XLR inputs and outputs for balanced operation from 20Hz to 20kHz.
Peavey PV 23XO 2-Way Stereo 3-Way Mono Crossover
Peavey PV 23XO 2-Way Stereo 3-Way Mono Crossover

collapse expand iconFeatures

2-way stereo or 3-way mono
Dedicated 100Hz subwoofer output
Mute switches
24 dB filters and mute switches
Fully adjustable crossover frequencies and levels
XLR input and output connectors
Internal power supply

collapse expand iconSpecs

Controls and switches
Channel Gain Control: 0 to +12 dB
Low Frequency Level Control: -ˆž to +6 dB
High Frequency Level Control: -ˆž to +6 dB
Low Frequency to High Frequency crossover: 100 Hz to 1 Khz x10 range: Changes Low Frequency to Mid Frequency from (100 Hz to 1 kHz) to (1kHz to 10 kHz) 2-way stereo/3-way mono changes the unit from 2-way stereo or 3-way mono

Frequency Response
Each output is -3 dB at the selected crossover frequency value. Outputs are essentially flat within their relative passbands
Distortion: Less than 0.02% THD @ +4 dBu,@ 1 kHz
Hum and Noise: Crossover controls set @ 1 kHz, all level controls set at 0 dB; 22 Hz to 22 kHz, unweighted gain @ 0dB(ref +4dBu) - 90dB
Low Frequency Output: -86 dBu below 80 dB
High Frequency Output: -84 dBu below -78 dB
Maximum Input Level: +14 dBu, (channel gain @ 0 dB input level controls set at 0 dB) +22 dBu
Maximum Output Level: +22 dBu, unbalanced +28 dBu, balanced
Input Impedance: 10 k ohms unbalanced

Connectors
Inputs: XLR Balanced
Outputs: XLR Balanced
Power Requirements: 120V AC, 50/60 Hz, 20 watts (domestic model)

Dimensions:
19"W x 1.75"H x 5.5"D (Unpacked)
20.25"W x 4"H x 7.25"D (Packed)

Weight:
5.5 lbs. (Packed)
4 lbs. (Unpacked)