Kustom PA

Description

Kustom's KPM10 powered wedge monitor combines quality performance and convenient features, all in a highly portable package. You'll find that the KP210 works well in a variety of environments, amplifying vocals, instruments, keyboards, drum machines, audio devices and more.

Features include a 50W power amp, one 10" speaker, a piezo driver, XLR and 1/4" inputs, a grill cover and a rugged carry handle. Its wedge shape makes it ideal for use as a stage monitor. A thru jack allows you to daisy-chain multiple monitors together, and an onboard volume control lets you achieve maximum volume without feedback.
Kustom PA KPM10 50W 10" 2-Way Powered Monitor
Kustom PA KPM10 50W 10" 2-Way Powered Monitor

Features

  • Full range response
  • Wedge shape
  • Rugged grill
  • Comfortable handle

Specs

  • Output Power: 50W RMS 8 Ohm load
  • Jack configuration: XLR Balanced Mic level input
  • THRU Passes thru signal on MIC input XLR jack
  • Line Out 1/4" Balanced Line level input
  • Frequency Response: 150HZ-20kHz at rated SPL
  • Nominal Impedance: 8 Ohms
  • Dimensions (W x H x D): 14" x 30.7" x 9.5"
  • Weight: 36.4lb

Reviews

4.44

45 Reviews

88%

of respondents would recommend this to a friend

Most Liked Positive Review

4

They hold their own...

Purchased for daughters high school garage band. As a parent and ad hoc assigned sound-guy I was looking for performance they could grow into, value for dollar, and simple to use. Powered monitors, mains, and a simple board is the easiest setup. These are great for the price, with little higher end knowledge to compare it to. They hold their own with 600W Harbinger powered mains without any problems. The only negative I can pass along is to be careful of RFI with high powered or florescent lights. I get a little buzz with near ballasts and CFL lights. I don't know if this is common among all sound gear though. I get a little with my mains too, but not quite as loud as these monitors. Overall winners though.

VS

Most Liked Negative Review

1

DOA Turns on but no sound!

I bought this Kustom PA KPM10 50W 10" 2-Way Powered Monitor on line and picked it up at Manhattan Union SQ GC, got home lights are on, but no sound coming from the speaker. Rolled is back to the store, got a used car salesmen to try to rip me off. Some sales people try to capitalize on your pain and misfortune so beware. Finally found another speaker in the store on my own. The Alto TX208, had to pay four more dollars and seems good so far. Wasted the whole day on this Kustom garbage and a clown of a sales KID! The second sales man who wrong me up for four dollars was cool!

Filters
Best Uses
  1. Performances17
  2. Outdoor Events / Games8
  3. Home Studio6
  4. Pro Audio / DJ / Mixing5
  5. Amateur Recording2
Cons
  1. Poor Sound Quality3
  2. Limited Functions2
  3. Not Durable2
  4. Bulky/Heavy1
  5. Unreliable1
Describe Yourself
  1. Experienced15
  2. Professional Musician6
  3. Novice1
Pros
  1. Easy To Use19
  2. Good Audio19
  3. Compact17
  4. Lightweight14
  5. Durable13
  • Works Great!

    4

    Verified Buyer

    submitted4 years ago

    byDale L.

    fromBrewton, Alabama.

    I use this monitor as a personal monitor as a musician.

  • The XLR inputs are line level. You a preamp or mixer.

    5

    submitted4 years ago

    byMt. Ranier

    fromSeattle, Wa

    Ok some negative comments say that there is no sound or weak sound. And the product description is also i corrects. These units have a phonejack and an XLR jack and are both balanced inputs but they are LINE Level. But the XLR is not meant as a MiC INPUT. You need either a preamp or a mixer to feed into this powered speaker. When you do that, you can get great sound for only a 50 Watt power amp.

  • Perfect monitor loud and clear

    5

    Verified Buyer

    submitted4 years ago

    byRyan b

    fromColorado

    Good monitors Had a set for 4 years never had problems till someone stole them so I got new ones still love them

  • I would definitely buy this again!

    5

    Verified Buyer

    submitted4 years ago

    byMeanGene W

    fromTexas City, TX

    These are great for daisy chaining together for small venue scenarios or jamming in the garage

  • DOA Turns on but no sound!

    1

    submitted5 years ago

    byJack NY

    fromManhattan, NY

    I bought this Kustom PA KPM10 50W 10" 2-Way Powered Monitor on line and picked it up at Manhattan Union SQ GC, got home lights are on, but no sound coming from the speaker. Rolled is back to the store, got a used car salesmen to try to rip me off. Some sales people try to capitalize on your pain and misfortune so beware. Finally found another speaker in the store on my own. The Alto TX208, had to pay four more dollars and seems good so far. Wasted the whole day on this Kustom garbage and a clown of a sales KID! The second sales man who wrong me up for four dollars was cool!

  • i would buy this again

    5

    Verified Buyer

    submitted5 years ago

    bysteve L

    fromelizabethton, tn

    use this as my drummers monitor, small powerful, clear sound

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • asked byLuke

    fromYuma AZ

    Will Kustom PA KPM10 work on electric drums?

    Open Reply - Beau
    The Kustom PA KPM10 would work well with electric drums.
  • asked byRebecca

    fromWisconsin

    I accidentally took out a screw that was holding something in place internally in the speaker. I need to know how to safely open it up so I can get it screwed back in.

    Open Reply - Thomas
    We need a little more information to better help you. Please give us a call at 877 687 5403
  • asked byDavid

    fromTX

    Can the Mic XLR and the 1/4-inch line be used simultaneously--for vocals accompanied by guitar for example? Thank you.

    Open Reply - Ronald
    No.
    Open Reply - Ronald
    No. It's an either/or situation. You can use one type of cable at a time.
  • asked byAns

    fromNJ

    Is it pole mountable?

    Open Reply - Kenneth
    This is not pole mountable
  • asked bypaul

    fromIL

    Can I use it with my pod hd500x

    Open Reply - Beau
    This monitor can be used with a POD HD500X.
  • asked byjaz

    fromCLT, NC

    What is the dimensions and weight. What is shown appears to be for the 100W KPM210. Not the smaller 50W

    Open Reply - Ronald
    14" x 30.7" x 9.5" Weight: 36.4lb
  • asked byLarry

    fromMI

    Is the KPM 10 50W monitor mountable on a speaker stand?

    Open Reply - Kenneth
    No, this can not be mounted on a stand
  • asked byThe Newb

    fromDetroit,Mich.

    would these work well as studio monitors out of a computer and/or a computer audio interface?

    Open Reply - Charles
    These are made to be PA speakers and give a full range general sound. True studio monitors would give more clarity.