Accidental damage, normalNormal wear and power surges are no longer an issue with these comprehensive and affordable plans. We even pay to ship your gear for repairs. More details.
Covers much more than the original manufacturer's warranty:
Damage due to unexpected and unintentional spills, drops and impacts
Damage due to normal wear and tear
Damage caused by lightning/power surge
Damage due to dust, internal heat, humidity, heavy usage
No Lemon Policy on merchandise over $200- if it fails for the same reason 3 times, it is replaced on the 4th breakdown
Complete refund in the event of failure or substandard performance on merchandise under $200 (Gift Certificate sent for the full price plus applicable sales tax paid)
Manufacturer's Specs Coverage -- The product does not need to fail to be covered. If the product does not perform as it did the first day you bought it, we will repair or replace it so that it does
Free shipping to and from repair facility
Plans are transferable in the event merchandise is sold
Limit of Liability: The least of the cost of (1) authorized repairs, (2) replacement with a product of similar features, (3) reimbursement for authorized repairs or replacement or (4) the price that you paid for the product.
*Limitations and exclusions apply. See terms and conditions for program details
When you choose Crown’s XTi 2 Series, you’re choosing one of the most powerful and innovative amplifiers on the market today. With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools, these amps are at the top of their class when it comes to thermal efficiency and system flexibility.
You also have greatly improved control capabilities. The addition of Peak x Plus Limiters gives you full command over threshold, attack and release, and we enhanced the Subharmonic Synth so you can easily manage frequency, gain and filter type, allowing for application-specific tuning.
Plus, you’ll now be able to tailor fan speed for specific applications and have software visibility of the Power Supply Temperature and AC Line Voltage. Combine all of that with integrated cast-aluminum rack handles for maximum durability and portability and you have the power to move you – and the world.
Crown XTi2002 Power Amplifier
Features:
Peak x Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls – normal, early and full speed – for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet Band Manager and System Architect control software Increased number of presets to a total of 30; 29 of which are user definable
Integrated Processing Input EQ: 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed. Crossover Filters: Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ±15 dB bandpass gain and polarity control. Output EQ: 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed. Delay: for signal alignment of driver; 50 mS of total delay. SubHarmonic Synth: takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type. Peak x Plus Limiter: user defeatable limiter that allows users to control Threshold, Attack, and Release times. Presets: 30 total presets, 29 of which are user-definable.
Performance Sensitivity (for full rated power at 4 ohms): 1.4 Vrms Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted) Total Harmonic Distortion (THD): <0.5% Damping Factor 20 Hz to 1 kHz: >500 Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db Input Impedance (nominal): 20k ohms balanced, 10k ohms unbalanced Maximum Input Signal: +22 dBu typical AC Line Voltage and Frequency Configurations: 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz AC Line Current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per channel): 8.3A; no more than 38W at idle Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing)
Controls Level: two front-panel rotary level controls, one for each channel Power Switch: On/Off switch applies AC power to the amplifier Sel/Prev/Next Buttons: three buttons near the LCD screen that are used to access menu items and front panel lockout LCD Screen: backlit liquid crystal display that shows preset and processing status
Indicators Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs). –10 Indicator: Green LED flashes when output signal exceeds –-10 dB below clip. –20 Indicator: Green LED flashes when output signal level exceeds –20 dB below clip. Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio. Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power
Input/Output Connectors Input Connectors: XLR, one per channel Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel. Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors). HiQnet USB Connector: Type B, connects to HiQnet network.
Construction Chassis: Steel Front Panel: Cast-aluminum Cooling: Proportional speed fan with front-to-rear airflow. Dimensions: 19" (W) x 3.5" (H) x 12.25" (D) Net Weight: 18.5 lb. (8.4kg)
3 year, no-fault parts and labor warranty on amps.
3 year warranty for most mics.
1 year warranty for Soundgrabber mic.
Crown Extended Warranty available as an option.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
Accidental damage protection (new gear only)
Expedited Repair
Free Shipping (for returns or repairs)
100% Coverage for Commercial Use
Extended Return Period
Extended Price Protection
No Lemon Guarantee
Free Transfer of Coverage to a new owner
Repair Costs Covered for up to 3 years from date of purchase
Repairs Can Be Authorized Toll-Free by Phone or the via the web
My partner and I operate a musical entertainment company. Our continuing to add speakers and base bins to our equipment developed the need to add another amp. In our opinion, there is nothing like the performance of a Crown.
My only complaint about setting it up for the first time is before we could plug in the cords, some strip had to be removed from the inputs. I don't remember hearing of this or seeing it written anywhere. This presented a problem at first because we thought we were going to have to get all new cords to fit the inputs. But upon careful examination, we discovered what was keeping our cords from going in.
2
of
2
people found this review helpful.
Was this review helpful?
Thank You for rating this review!
You must be logged in to write a review. Please click here to login.
Browse similar items:
Product Details
Customer reviews
Price
You are currently viewing the Printable Version of this page. Click here to return
to the Regular Version.
866-498-7882
Available in Stores
For your convenience, our online inventory has been expanded to include items in
our retail locations. Some items may be fulfilled from Guitar Center retail stores*.
Items will be inspected to ensure the store has the product you want, in the condition
you expect. If not, a store manager will contact you by phone or email within one
hour.
*Select items are available for in store pick-up only
(Based on 
Based on 
