Crown

collapse expand iconDescription

The Crown XLS2502 power amplifier represents a mighty upgrade to Crown's renown DriveCore series. In addition to its sleek new design, the XLS2502 provides an oversized LCD display and massive onboard DSP to maximize your sound. Available high-pass, low-pass and band-pass filters on each channel allow for precise DSP crossover, loudspeaker matching and system equalization. Incredibly versatile, the XLS2502 powers 2-, 4- or 8-ohm loads and bridges for 4-ohm or 8-ohm mono use. With unrivaled headroom and Crown's patented DriveCoreTM technology, the XLS2502 delivers 2,400W at 4 ohms bridged, guaranteeing a clean, undistorted signal.

Optimized DSP and LCD Interface

The XLS2502 features a redesigned interface with an LCD display three times larger than its predecessor, providing at-a-glance monitoring of all parameters. Onboard DSP offers high-pass, low-pass and band-pass filters on each channel for precise control of your sound. Perform system EQ, loudspeaker matching and complex DSP crossovers with ease using the intuitive interface. When paired with the optional RJ-45 network card, the XLS2502 integrates seamlessly with HiQnet for centralized monitoring and control of all system components.

Massive Power in an Efficient Package

Despite its lightweight, convection-cooled design, the XLS2502 delivers a whopping 775W per channel into 8 ohms and 2,400W bridged into 4 ohms, with tons of headroom for a clean, undistorted signal. Crown's patented DriveCore Class-D amplifier technology is ultra-efficient, reducing energy usage and heat generation. The XLS2502 works as hard as you need it to, powering 2-, 4- or 8-ohm loads in stereo or bridging for 4-ohm or 8-ohm mono operation.

Road-Ready Reliability

Designed and built by Crown, a brand renowned for reliability and performance, the XLS2502 is ready for the road. Convection cooling requires no noisy fans, and the lightweight design simplifies transportation and installation. Protection circuitry guards against overheating, short-circuiting and overloads, ensuring years of trouble-free operation. With affordable power and premium components, the Crown XLS2502 delivers everything you need.

Crown XLS2502 775W Power Amp With Onboard DSP
Crown XLS2502 775W Power Amp With Onboard DSP

collapse expand iconFeatures

  • Class D amp with Crown's ultraefficient DriveCore technology weighs less than 11 lb.
  • Higher DSP capabilities: More control; has band-pass filter per channel
  • Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
  • Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
  • Set sleep mode after specified time without having to press a button
  • Security setting disables menu buttons; menu locked/unlocked by entering combination
  • System reset allows factory settings to be restored
  • Remote power trigger
  • Peakx Limiters provide maximum output while protecting your speakers
  • XLR, 1/4", RCA inputs provide flexibility
  • Integrated PureBand Crossover System for better performance and control
  • Efficient forced-air fans prevent excessive thermal buildup

collapse expand iconSpecs

  • 2 ohm Dual: 1,200W
  • 4 ohm Dual: 775W
  • 8 ohm Dual: 440W
  • 4 ohm Bridged: 2400W
  • 8 ohm Bridged: 1550W
  • Sensitivity: 1.4Vrms
  • Frequency Response: +0dB, -1dB
  • Signal to Noise: > 97dB (at .775Vrms sensitivity, 6dB lower)
  • Intermodulation Distortion: < 0.3%
  • Damping Factor: > 200
  • THD: < 0.5%
  • Crosstalk: At 1kHz: > 85dB, At 20kHz: > 55dB
  • Dimensions: 19" (48.3 cm) x 3.5" (8.9 cm) x 7.7" (19.6 cm)
  • Weight: 8.6 lb. (3.9 kg)

collapse expand iconWarranty

3 year, no-fault parts and labor warranty on amps.
3 year warranty for most mics.
1 year warranty for Soundgrabber mic.
Crown Extended Warranty available as an option.

Featured Articles

collapse expand iconReviews

4.71

7 Reviews

86%

of respondents would recommend this to a friend

Filters
Best Uses
  1. Home Studio3
  2. Performances3
  3. Outdoor Events / Games2
  4. Pro Audio / DJ / Mixing2
Describe Yourself
  1. Experienced4
  2. Novice2
  3. Professional Musician1
Pros
  1. Easy To Use7
  2. Good Power Output7
  3. Excellent Sound6
  4. Warm / Comfy3
  5. Portable1
  • Effortless power and light weight

    5

    submitted3 years ago

    byTom

    fromDFW

    I own 2 of these Crown XLS 2502 amplifiers as well as a Crown XLS 2500. I've compared their sound to High Fidelity amplifiers from both Sonic Frontier and Adcom GFA 5802 amps. All of these amplifiers have their own sonic signature but frankly without a quick AB comparison it becomes evident that these Crown amps are suitable for Home Entertainment listening or sound reinforcement. They are clean and effortless in their power delivery and they run quietly. They are an excellent value. The only negative is that the RCA inputs seem to be more sensitive to ground loop interference than the Adcom and Sonic Frontier amplifiers. The only impact is that you need to be more careful in how you route your AC and line levels cables.

  • Excellent choice for band use or home entertainment

    5

    submitted3 years ago

    byTomH

    fromDFW

    I've compared the Crown XLS 2502 to an Adcom 5802 as well as a Sonic Frontier tube amp in a high resolution stereo with Martin Logan electrostatic speakers. The Crown is clean and powerful. The highs are not harsh. The midrange is a bit cooler (more recessed) than the Adcom and Sonic Frontiers amp but still good on the Crown. Super low level detail (air in the room) is not quite as good on the Crown but the difference is subtle. In my view the Crown performs well in a high fidelity system but is slightly drier (cooler) sounding than the Adcom and Sonic Frontier. The Crown is an excellent value amplifier.

  • Didn't think it would be enough. I was wrong!

    5

    submitted6 years ago

    byTony M

    fromGranbury TX.

    First off. Guitar center is awesome! Bought used Behtenger ep4000 from them but it didn't have the power I needed and the fan didn't work. Took I back to the store and exchanged no questions asked for a new Crown XLS2500. specs were lower than the ep so I was worried it would not be enough for the Rockville 2000 watt 8ohm 18 inch subwoofer but man I was wrong! I was only planning to use it temporarily until I could get a bigger one. Well the crown will stay. The controls are many and easy to use. The power is GREAT! I use in home on a PA system set up to just rock out and karaoke. I bridged it and turned it up not even half way. My wife said she could hear dishes rattling in the cabinets lol. I am really happy with this amp. It is my first crown and now I understand the hype. I am sold.

  • Great Product . Not so Good of Follow -Up Service.

    3

    Verified BuyerVerified Buyer

    submitted7 years ago

    byGlenee

    fromNorman, Okla

    Product is wonderful.

  • I am pleased with this purchase so far.

    5

    Verified BuyerVerified Buyer

    submitted8 years ago

    byBoss

    fromUtah

    I am using this amp to power my main 2 channel stereo system. I am using an Onkyo AVR as my pre-amp. I use this system for music listening during parties, and on my own as well. I generally like to listen at fairly high volumes. Running in stereo mode, this amp has plenty of power (440 watts at 8 ohm) for a large set of floor speakers. It can also be run in bridged mode as a mono block amp, for some serious wattage. This amp seemed to bring a richness to what I was normally used to hearing, in a good sense. But that may just be the extra head room I'm getting with this amp. The AVR I'm using is only 140 watts per channel. And I used to push it pretty hard. But bottom line is, this amp has power to spair, and after many hours of listening at fairly high volumes, I've never even felt a little bit of heat coming from the amp. So it sounds good to my ears, and seems to do all I ask of it with ease and power to spair.

  • Very Nice!!!

    5

    submitted8 years ago

    byGregG1010

    fromChicago

    I bought this amp to replace a macro-tech 2400. I love the light weight, functionality and BOY DOES IT SING!!!!! I used it with a pair of JBL's outside and they rocked!!!! Great Job!!!

  • Previous
  • 1
  • 2
  • Next

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • asked byNhac

    fromHouston,TX

    Is this a good amp for a pair of JBL TR125

    Is this a good amp for a pair of JBL TR125

    Open Reply - Gear-Support
    Excellent.
  • asked byJDub

    fromMedford OR

    Is this a good amp for a pair of JBL JRX212

    Is this a good amp for a pair of JBL JRX212

    Open Reply - Gear-Support
    Yes it is.
  • asked byTony

    fromAtlanta

    I have a speaker Jbl SRX 725 can Crown XLS 2505 works for speaker?
Thank you very much

    I have a speaker Jbl SRX 725 can Crown XLS 2505 works for speaker? Thank you very much

    Open Reply - Beau
    The Crown XLS 2505 power amp would work well and be compatible with a JBL SRX725.
  • asked byPatou Busa

    fromIowa

    1. what is the impedance for the speakers?
2. How many watts is it an amplifier?  How many watts (Rms) per channel?
3. can i use 3rd speaker?

    1. what is the impedance for the speakers? 2. How many watts is it an amplifier? How many watts (Rms) per channel? 3. can i use 3rd speaker?

    Open Reply - Ronald
    It can power 8, 4, or 2 ohm loads and can be bridged for 8 or 4 ohm mono operation.