Takamine 2013 "The Peak" Limited Edition Acoustic-Electric Guitar Natural

Takamine celebrates more than half a century of acoustic tradition and peerless guitar craft with the LTD2013 Peak model. This beautifully crafted instrument is designed to represent the very summit of the Takamine acoustic experience.

The LTD2013 Peak' unique œNew Yorker parlor-style design, solid spruce top and solid sapele back and sides produce a clear, full-bodied voice with airy sweetness and character. The distinctive climber motif inlay work spans the fingerboard, representing the concept of œPeak, a perspective of continuous improvement. Additional ornamental touches such as ivory body binding, dark wood purfling, abalone rosette, and gloss natural finish further accentuate the instrument' refined elegance.

Other premium features include a mahogany neck with 20-fret rosewood fingerboard, rosewood bridge with split saddle, chrome tuners with pearl knobs, Palathetic pickup and CT4B II onboard preamp.

CT4B II Preamp Features
The CT4B II preamp is designed for ease of use and purity of tone. The CT4B II consists of 3 bands of graphic EQ tone control, a volume control slider and a built-in chromatic tuner.

The 3 band EQ provides control over the bass (LOW), midrange (MID) and treble (HIGH) frequency response. With the sliders set at the midpoint (0) the electric signal from the guitar is evenly balanced across the frequency range. The desired tone is then dialed in by using the sliders to add or subtract frequency response as desired. Each frequency control slider will raise or lower the band response by +/-5db.

The volume slider adjusts the output volume of the preamp.

The convenient built-in chromatic tuner is extremely accurate and very easy to use. The tuner is activated by pressing the TUNER POWER button. To tune your instrument, simply pluck any open string. The tuner will then display the name of the note that has the closest frequency of the string played. The amount of deviation from the note (higher or lower) is displayed by red arrows indicating sharp or flat. When only the green center light illuminates, the note indicated in red has reached precise tuning. When the guitar is unplugged, the TUNER POWER switch acts as on and off.

Your CT4B II tuner is also capable of being calibrated to frequencies other than standard A440. When the PITCH button is pressed, the frequency that is currently set will be shown by a flashing red light above the frequency number. While the reference light is flashing, press the Pitch repeatedly to set the desired reference pitch. With each press of the button, the reference pitch will increase by 1Hz increments from 440Hz to 445Hz. Once the pitch has reached 445Hz, the next press will decrease the pitch to 438Hz. When the button operation is stopped, the reference pitch is set and the tuner will stand by for tuning.

To facilitate silent on-stage tuning, the TUNER POWER button also acts as a mute switch when the guitar is played amplified. If you wish to be able to tune with your signal amplified, simply press the TUNER POWER a second time. Press a third time to shut off the tuner function. The tuner will shut off automatically when there is no signal for a couple of minutes.