No matter whether you are a speaker, presenter or rocking the crowd, the XS Wireless Presentation Set puts you in front of every stage. The XSW 52-A is part of the XS series of wireless mics from Sennheiser, one of the industry's renowned leaders in microphone technology. The XS series receiver runs on 960 tunable frequencies across 24 MHz, to avoi... Click To Read More About This Product
No matter whether you are a speaker, presenter or rocking the crowd, the XS Wireless Presentation Set puts you in front of every stage. The XSW 52-A is part of the XS series of wireless mics from Sennheiser, one of the industry's renowned leaders in microphone technology. The XS series receiver runs on 960 tunable frequencies across 24 MHz, to avoid any possible interference with your sound. The receivers are all made of solid-construction metal housing, and provide up to 10 hours of operation time for a worry-free performance.
The XSW 52-A Headmic Set features a compact bodypack transmitter and a lightweight, comfortable headset mic that will give you absolute freedom of movement for a vivid and impressive live performance. With 2.4GHz synchronization between the transmitter and receiver and 10mW of output, the XSW 52-A Headmic Set will have you performing from a range of up to 250 feet in ideal RF environments. There are 8 frequency banks containing 12 coordinated frequencies each, which will allow for a fast setup of multi-channel systems. Connections include dual outputs with balanced XLR and unbalanced 1/4", selectable for either mic or line level uses. The package includes the ME 3 cardioid headset mic, SK 20 bodypack transmitter, EM 10 true diversity receiver, NT 2-3 power supply, 2 rod antennas, and 2 AA batteries.
Easy-to-use, all-in-one package for speakers, singers and presenters
Comfortable, lightweight headset mic and compact bodypack transmitter give you absolute freedom on stage
All metal, True Diversity receiver for worry-free operation
Up to 10 hours of operation using a pair of AA batteries
960 tunable frequencies across 24 MHz, to avoid interference
Easy 2.4GHz synchronization between transmitter and receiver, even at a distance
8 Frequency banks containing 12 coordinated frequencies each, for fast setup of multi-channel systems
Dual outputs with balanced XLR and unbalanced 1/4", selectable for either mic or line level
10mW Output, for up to 250 feet of transmission range in a good RF environment
ME 3 Headset Mic Specs:
Microphone type: pre-polarised condenser
Input sensitivity: 1.6 mV/Pa
Pick-up pattern: cardioid
Max. SPL: 150 dB
SK 20 Bodypack Transmitter Specs:
RF output power: 10mW
AF frequency response: 60Hz - 16kHz, Line input | 100Hz - 16kHz, Mic input
AF input: 3.5 mm jack
Nom. Input voltage (Mic/Line): 0.5 Vrms/1.8 Vrms (Mic/Line) at -30dB gain
Power supply: 2 AA batteries, 1.5V
Operating time: up to 10 hours
Dimensions: 2-5/8" — 3-3/4" — 15/16"
Weight: 0.21 lb.
EM10 Receiver Specs:
Receiver principle: True Diversity
Sensitivity (at peak deviation): < 3Î¼V at 52dBa rms S/N
Adjacent channel rejection: ‰ 60dB
Intermodulation rejection: ‰ 50dB
Blocking: ‰ 65dB
AF frequency response: 60-16,000Hz
Pilot tone: 32.768kHz
Antenna input: 2 BNC connectors, 50-ohms
AF output voltage (at peak dev., 1 kHz AF): 1„4'' (6.3 mm) jack socket (unbalanced): +8 dBu; XLR socket (balanced): +14 dBu
Power supply: 12 VDC nom./300 mA
Dimensions: 7-7/8" — 1-5/8" — 5"
Weight: 1.6 lb.
ME 3 clip-on mic, SK 20 bodypack transmitter, EM 10 true diversity receiver, NT 2-3 power supply, 2 rod antennas, 2 AA batteries, Pouch, Instruction manual
Guitar Center's Pro Coverage
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.
Reviewed by 2 customers
Displaying reviews 1-2
Comments about Sennheiser XSW 52-A Wireless Headmic Set:
I purchased 8 of these mics to replace a unit that was an all inclusive 8 mics in one unit. That 8 in 1 was a big mistake. I have not had any problem finding a frequency with these XSW-52 mics that I could use without interference. They link to the transmitter automatically with the sync feature. My sound board is about 80 feet from the mics and there is excellent sound quality and I have not experenced any drop-out. The sound is a little bassy, but is easily corrected with th EQ and repositioning the mic distance from the mouth. For the money these were a very good solution to an unacceptable problem.
Comments about Sennheiser XSW 52-A Wireless Headmic Set:
I bought 10 of these as part of a sound system upgrade for a high school. They worked great once the kids got them out from under their noses and we learned a few other things. First, I'd suggest pulling the mute button out and covering the hole with gaffers tape. The button is soft rubber and comes in and out easily. We also taped over all the other controls. They are way to easy to hit when you are burring the body pack in a costume. The only real problem we had was that one of the belt clips broke off. I don't know what caused that -- maybe horseplay back stage. What really surprised me was that there is no way for a user to replace the clip. It's installed from the inside and you'd have to remove all the guts from the unit. The problem there is that after puling a few screws, you need to start unsoldering. Yuck!!!! I called the support number at Sennheiser and was blown away when I got to talk to a real person who knew what they were talking about. The next surprise was that he didn't care how it got broke. It was under warranty so it was covered. I printed of a prepaid UPS shipping label they provided, boxed it up and dropped it at a UPS pickup. A couple of days later, I got an email saying they had received the unit. A couple of more days and I got another email with the return shipping tracking number. A couple more days and it's sitting at my door. Now that's service! Now I just hope that I just had a weak clip and this isn't a sign of things to come.