- OverviewJump to Overview
- SpecificationsJump to Specifications
- Warranty InformationJump to Warranty
- RecommendationsJump to Recommendations
- Customer ReviewsJump to Reviews
QSC RMX 5050 5,000 Watt Power Amp
- Item #:
- 127474181764071476
- Write a Review
With amazing audio performance and road-proven durability, the QSC RMX 5050 5,000 Watt Power Amp is suited for a wide range of sound reinforcement applications. Features a 3-tier, Class H design. Extremely efficient at real world power levels. Less AC current is wasted and more goes into producing useful audio power. Uses the best available compone... Click To Read More About This Product
With amazing audio performance and road-proven durability, the QSC RMX 5050 5,000 Watt Power Amp is suited for a wide range of sound reinforcement applications. Features a 3-tier, Class H design. Extremely efficient at real world power levels. Less AC current is wasted and more goes into producing useful audio power. Uses the best available components.
Features balanced 1/4" TRS, XLR, and barrier strip inputs, binding posts and Neutrik Speakon outputs, front-mounted gain controls, plus signal and clip LED indicators to monitor performance. With high-current toroidal transformers for greater 2-ohm power and low noise.
Independent user-defeatable clip limiters reduce distortion.
Selectable low-frequency filters (30Hz or 50Hz) protect speakers and increase headroom.
Balanced 1/4" (6.3 mm) TRS, XLR, and barrier strip inputs for maximum flexibility.
Binding post and Neutrik Speakon outputs.
Has front-mounted gain controls for easy access.
Signal and Clip LED indicators to monitor performance
3-year warranty.
ACCESSORIES
STEREO MODE, Both Channels Driven
8 ohms FTC 20 Hz-20 kHz 0.1% THD 1050 Watts
4 ohms FTC 20 Hz-20 kHz 0.1% THD 1600 Watts
2 ohms FTC 20 Hz-20 kHz 0.1% THD 2000 Watts
8 ohms EIA 1 kHz 0.1% THD 1100 Watts
4 ohms EIA 1 kHz 0.1% THD 1800 Watts
2 ohms EIA 1 kHz 1% THD 2500 Watts
BRIDGE-MONO MODE
8 ohms FTC 20 Hz-20 kHz 0.1% THD 3200 Watts
8 ohms EIA 1 kHz 0.1% THD 3600 Watts
4 ohms EIA 1 kHz 1% THD 5000 Watts
Distortion (SMPTE-IM) Less than 0.02%
Distortion (Typical)
20Hz-20kHz: 10dB below rated power
1kHz and below: full rated power
Less than 0.02%
Less than 0.02%
Frequency Response
20Hz to 20kHz, 8 ohms, LF filter bypassed, +0/-1dB
5 Hz to 50 kHz, 8 ohms, LF filter bypassed, +0/-3 dB
Damping Factor Greater than 250 @ 8 ohm
Noise (unweighted) 100 dB below rated output (20 Hz to 20 kHz, 8 ohm load)
Input Sensitivity 1.42 Vrms for 1050 watts into 8 ohms
NOTE: The RMX 5050 requires 20A 120V service and is supplied with a NEMA 5-20 plug on the cordset.
Features
- Extremely high power
- Advanced thermal performance delivers higher continuous power in 2-ohms stereo or 4-ohms bridged applications
- Dual mono, high current power supply for increased reliability and performance
- 3RU chassis is 16" deep.
- High-current toroidal transformers for greater 2-ohm power and low noise
- Independent user-defeatable clip limiters reduce distortion
- Selectable low-frequency filters (30Hz or 50Hz) protect speakers and increase headroom
- Balanced 1/4" (6.3mm) TRS, XLR, and barrier strip inputs for maximum flexibility
- Binding post and Neutrik Speakon outputs
- Front-mounted gain controls for easy access
- Signal and Clip LED indicators to monitor performance
- 3-year warranty.
- ACCESSORIES
- STEREO MODE, Both Channels Driven
- 8 ohms FTC 20 Hz-20 kHz 0.1% THD 1050 Watts
- 4 ohms FTC 20 Hz-20 kHz 0.1% THD 1600 Watts
- 2 ohms FTC 20 Hz-20 kHz 0.1% THD 2000 Watts
- 8 ohms EIA 1 kHz 0.1% THD 1100 Watts
- 4 ohms EIA 1 kHz 0.1% THD 1800 Watts
- 2 ohms EIA 1 kHz 1% THD 2500 Watts
- BRIDGE-MONO MODE
- 8 ohms FTC 20 Hz-20 kHz 0.1% THD 3200 Watts
- 8 ohms EIA 1 kHz 0.1% THD 3600 Watts
- 4 ohms EIA 1 kHz 1% THD 5000 Watts
- Distortion (SMPTE-IM) Less than 0.02%
- Distortion (Typical)
- 20Hz-20kHz: 10dB below rated power
- 1kHz and below: full rated power
- Less than 0.02%
- Less than 0.02%
- Frequency Response
- 20Hz to 20kHz, 8 ohms, LF filter bypassed, +0/-1dB
- 5 Hz to 50 kHz, 8 ohms, LF filter bypassed, +0/-3 dB
- Damping Factor Greater than 250 @ 8 ohm
- Noise (unweighted) 100 dB below rated output (20 Hz to 20 kHz, 8 ohm load)
- Input Sensitivity 1.42 Vrms for 1050 watts into 8 ohms
Review Snapshot
by PowerReviews(based on 4 reviews)
Ratings Distribution
Reviewed by 4 customers
Displaying reviews 1-4
Comments about QSC RMX 5050 5,000 Watt Power Amp:
QSC has some outstanding amps. This being the best. Talk about power. 5,000 watts of power. Amazing! Many input and output features. I own five.
Comments about QSC RMX 5050 5,000 Watt Power Amp:
This power can handle anything you throw at it. I can rock 4 JBLs 515 with lots of headroom for monitors. It also shakes any sub system with high definition and less energy waste.
Comments about QSC RMX 5050 5,000 Watt Power Amp:
Purchased 3 5050 2 years ago for my bar in spring. They sounded great, but after several months the amps developed problems. No signal or distorted. They were repaired and QSC said it was a problem with the reostats and a fix was developed. After two years each amp has failed me at least twice. I will never buy another QSC product again. These amps are expensive and should withstand more than a few months at a time in a DJ application without failure and this is just not the case.
Comments about QSC RMX 5050 5,000 Watt Power Amp:
I bought the qsc rmx5050 7 year ago and still working perfect, i never had a problem with it, it sounds very loud with regular speakers but also very strong bass with my subwoofers, I really like it, good quality
Displaying reviews 1-4
