The Phonic W5 is a stereo audio wireless system that includes a single digital transmitter unit and 2 digital receiver modules. It transmits from any home audio device to receivers connected to active speakers. Because it transmits a digital signal, it eliminates messy cables, prevents interference and noise, and allows encrypted security. Transmi... Click To Read More About This Product
Find a similar product below or contact us for a recommendation of a great alternative.
The Phonic W5 is a stereo audio wireless system that includes a single digital transmitter unit and 2 digital receiver modules. It transmits from any home audio device to receivers connected to active speakers. Because it transmits a digital signal, it eliminates messy cables, prevents interference and noise, and allows encrypted security. Transmitter range: 100 meters.
Starter kit offering one transmitter unit and 2 receiver units
High audio quality through 2.4 GHz Uncompressed PCM transmission
Varied inputs and outputs, including USB 2.0 (for PC only), optical S/PDIF and RCA
1100mAH Li-ion battery embedded into receiver with a life up to 4 hours
Supports multiport link: one transmitter can link to between 1 and 5 receivers
Range: up to 100 meters
Provides 16-bit audio at sampling rates between 32, 44.1 and 48khz
Easy system link between receiver and transmitter
Type: Digital Wireless Receiver Box unit
Analog Audio Interface: Stereo RCA jacks; L x 1, R x 1
Output Terminals Level/ Impedance: 1.2V/480 ohms
Digital output Terminal: Optical S/PDIF out
Battery life: approx. 3hrs
Battery charge time: Power on stage 5 hrs, Power off 2 hrs
Power jack: DC+5V power jack
Type: Digital Wireless Transmitter Box unit
Analog Audio Interface: Stereo RCA jacks
Input Terminals Level/Impedance: 800mV/ 33K ohms
USB 2.0 Interface: USB mini-B port
USB Audio Format: Linear PCM: 16-bit 32/44.1/48KHz
Power jack: DC+5V power jack
Power button and Indicator:
1. Push and hold this button for 2 seconds to turn the unit on
2. Holding this button down for 5 seconds while the unit turn the unit
RF button and Indicator
Push and hold this button simultaneously with the receiver unit RF button
and a wireless link will be established between the two. The blue
LED indicator below the button will flash briefly and then remain on
to show that a connection has been established.
RF Button: Press down 2 secReceiver Unit
Reviewed by 1 customer
Displaying review 1
Comments about Phonic W5 Wireless Speaker System:
Processor delay time added an echo to Karaoke but worked fine for music. 2.4 GHz and no multichannel - not a good combination - I got a lot of dropped sound. Also, I sent in some support issues to Phonic and NEVER recieved a response! I returned the product.
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.