Skip to main content Skip to footer
Save up to 25% on guitars, drums, keys, pro audio and more Shop Now

Peavey SP 4 Speaker Pair

Item #: 
1309501737886584609
  • Write a Review
Product Description:

The Peavey SP 4 speaker has an ingenious design that improves low-end performance, and produces clearer sound, in the high frequency range. This quasi three-way enclosure has 2 - 15" Peavey Black Widow speakers, capable of handling up to 4000W peak power, and have field replaceable baskets for quick, easy repair. It has a much more efficient crosso...  Click To Read More About This Product

We're sorry – we no longer carry this item

Find a similar product below or contact us for a recommendation of a great alternative.

Call Us: 866-498-7882
Overview

The Peavey SP 4 speaker has an ingenious design that improves low-end performance, and produces clearer sound, in the high frequency range. This quasi three-way enclosure has 2 - 15" Peavey Black Widow speakers, capable of handling up to 4000W peak power, and have field replaceable baskets for quick, easy repair. It has a much more efficient crossover, that directs low frequencies to both woofers, while limiting midrange frequencies to only the top woofer. An RX22 titanium driver that is ferrofluid cooled for maximum tweeter performance, and longevity, handles upper-mids, and high frequencies. Peavey's exclusive Quadratic Throat Waveguide technology actually reduces horn distortion, and aims sound directly at the audience, not over their heads. The aspen hardwood plywood enclosure uses extensive internal bracing that produces tighter bass response. It's finished in the durable Hammertex, and has heavy-duty handles and kick back wheels for easy transportation.

Made in the USA.

Features

Quasi-3-way, full-range, biampable sound reinforcement system 
RX 22 compression driver with ferrofluid cooling
2 - 15" BWX Black Widow 4" VC woofers
Patented Quadratic Throat Waveguide technology
Sound Guard III tweeter protection
Patented Radialinear Planar Phase Correction System
Full-range inputs include a Neutrik Speakon 4-pin jack and 2 - 1/4" phone jacks
Biamp capability via internal wiring jumper
Aspen hardwood plywood enclosure
Durable Hammertex finish

Made in the USA
Specifications
Frequency response, 1 meter on-axis, 
swept-sine in anechoic environment:
52 Hz to 17 kHz (±3 dB)
Usable low frequency limit
(-10 dB point):
45 Hz

Power handling:
Full range:
1,000W continuous
2,000W program
4,000W peak
Low frequency section:
1,000W continuous
2,000W program
4,000W peak
High frequency section:
60W continuous
120W program
240W peak

Sound pressure level, 1W,
1 meter in anechoic environment:

Full range:
100.0 dB SPL (2.83 V input)
Low frequency section:
101 dB SPL (2.83 V input)
Mid/high frequency section:
107 dB SPL (2.83 V input)

Maximum sound pressure level
(1 meter):

Full range:
130 dB SPL continuous
136 dB SPL peak
Low frequency section:
131 dB SPL continuous
137 dB SPL peak
Passive mid/high frequency
section:
129 dB SPL continuous
135 dB SPL peak

Radiation angle measured at
-6 dB point of polar response:
90 degree horizontal by 40 degree vertical
The vertical main polar lobe is
angled down 10 degree with respect to
straight ahead being +10, -30

Transducer complement:
Low frequency section:
2x15" woofer, vented
1508-8 HE SF
High frequency section:
1x .875" exit /51mm voice coil
RX 22 compression driver
on an asymmetrical Quadratic Throat CD horn

Box tuning frequency:
Low Frequency Section: 58 Hz

Crossover frequency
(internal passive):
Low frequency ” High frequency
1800 Hz

Recommended Active Crossover
Frequency Region and Slope:
Low Frequency ” High Frequency:
1800 Hz at 12 dB/octave

Time Offset:
Low Frequency: 0.0 ms
Mid/High Frequency: 0.48 ms

Impedance (Z):
Full Range:
Nominal: 4.0 Ohms
Minimum: 3.4 Ohms
Low Frequency:
Nominal: 4.0 Ohms
Minimum: 3.2 Ohms
Passive HF:
Nominal: 8.0 Ohms
Minimum: 5.4 Ohms

Input connections:
Full Range: two 1/4" phone jacks,
one Neutrik four-pin Speakon jack
& bi-amp capability provided via an
internal wiring jumper

Enclosure materials and finish:
Aspen hardwood plywood enclosure
Durable Hammertex covering

Mounting provisions:
This unit is not designed for overhead suspension
Built-in SA-1 stand-mount adapter
and four large rubber feet on bottom
for floor use

Dimensions (H x W x D):
Front:
50.63" x 20.55" x 23.00"
1286 mm x 522 mm x 584 mm
Rear:
50.63" x 12.63" x 23.00"
1286 mm x 321 mm x 584 mm
Net Weight:
127 lb. (516.6kg)
Customer Reviews
Questions & Answers View All
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.