The compact and portable PVXp 12 active (powered) loudspeakers deliver high fidelity and impressive power using Peavey's legendary speaker and power amp technology. The PVXp Series powered enclosures bring 800 watts peak of crystal-clear highs and deep low end, while using exclusive DDT compression technology to maintain clarity throughout the mix.... Click To Read More About This Product
In Stock & Ready To Shipin_stock
The compact and portable PVXp 12 active (powered) loudspeakers deliver high fidelity and impressive power using Peavey's legendary speaker and power amp technology. The PVXp Series powered enclosures bring 800 watts peak of crystal-clear highs and deep low end, while using exclusive DDT compression technology to maintain clarity throughout the mix. A module bay allows for use of expansion modules to increase the functionality of the enclosures.
Peavey PVX enclosures are constructed with heavy-duty, premium Peavey woofers with 2-3/8-inch voice coils for the lows and low-mids, while the Peavey RX14 1.4-inch titanium diaphragm compression driver, coupled to a constant directivity horn, handles the highs and mid-highs.
Peavey PVX enclosures are housed in a durable, injection-molded enclosure that includes a pole mount, three multi-point flying locations and a tilt-back design to accommodate use as a personal monitor. A black powder-coated steel grille provides driver protection and a clean, professional appearance.
Two-way 800 watt peak power enclosure
12" high-performance woofer with 2.3" voice coil
Multiple cabinet fly points
Titanium compression driver
Expansion module bay
Angled side for use as monitor when required
LED signal present and DDT active indicator
Rugged polypropylene molded enclosure
Combination 1/4" and XLR input
Exclusive DDT compression and speaker protection
XLR and 1/4" through outputs
Molded in cabinet handles
Frequency Range, 1 meter on-axis, swept-sine in ½ Space environment:
51 Hz to 20 kHz
Frequency Response, 1 meter on-axis, swept-sine in anechoic environment:
60 Hz to 20 kHz (±3 dB)
Usable Low Frequency limit (-10 dB point anechoic): 55 Hz
Internal power amplifiers (@120 VAC line):
Total of 800 watts peak available power
Woofer - 650 watts peak available power
Continuous Power: 325 watts @ less than 1% distortion
Tweeter - 150 watts peak available power
Continuous Power: 75 watts @ less than 1% distortion.
Nominal sensitivity (1W @1M, swept sine input in anechoic environment):
97 dB (average)
Maximum Sound Pressure Level (1 meter):
127 dB SPL peak with music
Radiation Angle measured at -6 dB point of polar response:
Nominal: 100 degrees horizontal X 50 degrees vertical
(Axis of the vertical main polar lobe is angled down 10 degrees, resulting in the angular pattern with respect to straight ahead being +15, -35 degrees)
Heavy-duty 12" woofer with 2 3/8" voice coil & 50 oz. magnet
RX14 1.4" titanium diaphragm dynamic compression driver
Box Tuning Frequency:
Electroacoustic crossover frequency: 2,800 Hz
Internal Electronic two-way crossover with driver EQ, level matching, bass
boost and subsonic filtering.
12 dB/octave (2nd order) low pass, 24dB/octave (fourth order) high pass,
both with staggered poles and driver EQ.
One combo female XLR/ 1/4" phone jack providing balanced line-level operation, with switch-selectable mic- or line-level sensitivity.
One male XLR and one 1 /.4" phone jack. The Thru jacks are intended for the use of linking multiple PVx12D˜s in a line or to provide a feed to a powered subwoofer, or other electronics that needs to receive a full range version of the input signal.
Enclosure Materials & Finish:
Black ABS plastic with textured surface, black powder-coated perforated grille.
Also available in white.
Unit has two sets of two M10 inserts, one pair on the top, and one pair on the bottom.
Additional mounting points are a set of four M8 inserts on the top, and a set of four on the right side in the handle recess, and a set of four on the bottom, which use the Peavey VersaMount 70+ mounting bracket.
Four rubber feet provide vibration free floor or stage use, and a molded-in stand mounting cup is on the bottom.
Dimensions (H x W x D):
24.50 in. x 16.10 in. x 15.00 in.
22.75 in. x 8.75 in. x 15.00 in.
43 Lbs. (19.5 kg)
Guitar Center's Pro Coverage
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.