Gear SpecialistBundlingMusician
Call 866‑388‑4445 or chat for exclusive deals, plus save on orders of $199+
Open Box Nady MHT-16 Horn Wireless System Level 1
(2)|Q&A|Item #:H77408004000000
Condition: Open Box - Like New
Save on orders $199+ and get expert advice from a Gear Adviser
Need Help?
Description
The Nady MHT-16 Horn Wireless System includes the MGT-16 receiver and the MH-16 Saxophone (Horn) Instrument Transmitter
The Nady MH-16 is a miniature, lightweight transmitter that clips directly onto bell of horn. No cord connection needed. A protective rubberized clamp-on device easily locks transmitter firmly to horn. A flexible gooseneck allows optimum microphone positioning. Transmitter features a high-performance microphone with tight cardioid polar pattern and wide frequency response to suppress unwanted feedback.
The Nady MGT-16 is a compact receiver can be placed anywhere you choose. It is powered by internal AA batteries or AC adapter (supplied). Has 16 user-selectable UHF frequencies for interference-free operation. ASC (Auto-Sync Channel) infrared wireless download pairs transmitter to selected receiver frequency for quick, easy setup. It has a 250 ft. line-of-sight operating range, and is powered by single AAA battery.
The Nady MH-16 is a miniature, lightweight transmitter that clips directly onto bell of horn. No cord connection needed. A protective rubberized clamp-on device easily locks transmitter firmly to horn. A flexible gooseneck allows optimum microphone positioning. Transmitter features a high-performance microphone with tight cardioid polar pattern and wide frequency response to suppress unwanted feedback.
The Nady MGT-16 is a compact receiver can be placed anywhere you choose. It is powered by internal AA batteries or AC adapter (supplied). Has 16 user-selectable UHF frequencies for interference-free operation. ASC (Auto-Sync Channel) infrared wireless download pairs transmitter to selected receiver frequency for quick, easy setup. It has a 250 ft. line-of-sight operating range, and is powered by single AAA battery.
Features
MGT-16 Instrument Receiver
- Compact, portable, "pedal style" receiver can be placed anywhere
- Dual ¼ wave antennas
- Unbalanced ¼" line output plug
- Power On/Off/Mute switch; Volume Control; LED indicators for Low Battery, and RF Reception; DIP-switch channel selection with IR sync to transmitter; IR Sync LED
- Powered by DC adapter (included) or two AA alkaline batteries for
- portability (Up to 8 hours battery life)
- Transmitter
- Clip-on-the-horn barrel style without any tangling wires
- Up to eight hours of battery life from a single AAA alkaline or NiMH rechargeable battery
- Infrared channel sync with receiver for instant setup
- Power On/Off switch; Power/Low Battery LED indicators; IR Sync LED
- Input level attenuation switch; internal audio level control trim-pot
- External flexible wire antenna
Specs
GENERAL
- Frequency Response: 50Hz-16kHz (-3dB)
- Dynamic Range: 120dB
- Oscillating System: Phase Lock Loop (PLL)
- Total Harmonic Distortion (THD): <0.8%
- RF Carrier Frequency Range: 902.40MHz-923.70MHz
- Modulation: FM (F3E), +/-30KHz normal
- Operating Range: Up to 250 feet (typical, depending on site conditions)
- Controls: Audio Level, Power ON/MUTE/OFF, Frequency Select DIP-switches, IR sync button
- Connectors: Unbalanced ¼", DC Adapter input jack
- LED Indicators: Power ON (Red-continuous), Low Power (Amber-continuous),RX
- reception (Green), IR Sync LED
- Antennas: Dual ¼ wave, adjustable orientation
- Signal-to-Noise Ratio: > 105dB (w/AC/DC power supply)
- Receiver Sensitivity: -110dBm nominal, 12dB SINAD
- Squelch Sensitivity: -95dBm (minimum/normal setting), adjustable
- Output Impedance: 1.0KÎ
- Power Consumption: DC: 3V/ 115mA or AC/DC adapter: 15VDC/200mA
- Battery: Two AA alkaline or NiMH
- Battery Life: Up to 8 hours
- Dimensions: 2.75" W x 5.00" D x 1.88" H (7.0 cm x 12.7 cm x 4.78 cm)
- Weight: (w/o batteries) 5.7 oz (161.6 g)
- Housing Construction: ABS Plastic
- RF Power Out: 25mW nominal, 50mW maximum
- Harmonic & spurious emissions: -50dB
- Controls: Power ON/OFF, 15dB Attenuation Pad select switch
- LED Indicators: Power ON (Red-single flash), Low Battery (Red flashing)
- Input Impedance: 500KÎ
- Power Consumption: DC 1.5V/90mA
- Battery: One AAA alkaline or NiMH
- Battery life: Up to 8 hours
- Antenna: ¼ wave, permanently attached
- Dimensions: 8.5" W x 2.25" D x 1.0" H (21.6 cm x 5. 8 cm x 2.54 cm)
- Weight (w/o batteries): 2.1 oz (59.6 g)
- Housing Construction: ABS Plastic