Focusrite

collapse expand iconDescription

A valuable addition to Focusrite’s RedNet range of audio-over-IP interfaces, RedNet AM2 is a compact, flexible Dante-compatible stereo monitoring unit combining headphone and line outputs for monitoring of signals from the Dante network wherever required. RedNet AM2 features a 1/4" front-panel TRS headphone socket, plus a pair of rear-mounted balanced line outputs with male XLR connectors for loudspeaker monitoring and other applications.

Designed to drive high- or low-impedance headphones at high levels, the headphone output delivers significant audio output power. The compact unit, mounted in an enclosure based around a sturdy road-worthy aluminum extrusion, is fitted with non-slip feet and can either sit securely on a flat surface or be mounted on top of a mic stand using the standard threaded bush incorporated in the base.

RedNet AM2 includes the latest two-channel Dante receiver and provides high-quality digital to analogue conversion at up to 96kHz for accurate monitoring on loudspeakers or headphones. Two large volume control knobs are provided for Headphone and Line output levels, the latter featuring a mute button with associated LED. Other indicators show the presence of power, network and signal level.

Dual locking etherCON connectors are included to connect the network and to daisy chain to additional network devices. The unit is powered via Power over Ethernet (PoE) or via the rear-panel barrel connector and included DC power supply.

Now Comes With Brainworx bx_console Focusrite Plug-in

This awesome plug-in recreates the analog signal paths of Focusrite’s revered ISA 110 and ISA 130 modules, which were a part of the Focusrite Studio Console. Designed and coded by the DSP geniuses at acclaimed software house Brainworx, the new bx_console Focusrite VST/AU/AAX plug-in for Mac and PC faithfully captures the sound, feel and styling of the original iconic hardware.

If you purchased any Red, RedNet or ISA solution from January 2020 on, you will have the plug-in available in your Focusrite account as long as you’ve registered your product.
Open Box Focusrite RedNet AM2 Headphone Amplifier Level 1
Open Box Focusrite RedNet AM2 Headphone Amplifier Level 1
Open Box Focusrite RedNet AM2 Headphone Amplifier Level 1

collapse expand iconFeatures

  • Cost-effective headphone/loudspeaker stereo monitoring solution for Dante offers lower system deployment costs
  • Superb digital to analog conversion at up to 96kHz provides transparent and accurate audio quality
  • Powerful headphone amp delivers plenty of level even with high-Z headphones for maximum high-quality audibility
  • Independent headphone/line output level controls for maximum control
  • Line output mute switch instantly kills the signal to external speakers or power amps
  • Integrated Gigabit Ethernet switch allows connection of a second device for simpler cabling
  • Built-in mic stand mount plus non-slip feet—mount RedNet AM2 to a mic stand or place securely on a surface
  • Focusrite offers a 3-year manufacturer's warranty

collapse expand iconSpecs

Line Outputs
  • Max output: Switchable +18/+24dBu; 0dBFS input
  • Frequency Response: 20Hz–20kHz ± 0.1dB
  • THD+n: 0.0007% (-103dB) unweighted; -1dBFS input, 20Hz–22kHz
  • Dynamic Range: 119dB "A"-weighted (-60dBFS method)
  • Signal-to-noise ratio: 119dB "A"-weighted; 20Hz–20kHz
  • Crosstalk: -100dB; -20dBFS input, 20Hz–20kHz
Headphone Outputs
  • Max output: +21.5dBu; 0dBFS input, R=600 Ohm
  • Frequency Response: 20Hz–20kHz ± 0.1dB
  • THD+n: 0.001% (-100dB) unweighted; -1dBFS input, 20Hz–22kHz
  • Dynamic Range: 118dB "A"-weighted (-60dBFS method)
  • Signal-to-noise ratio: 118dB "A"-weighted; 20Hz_20kHz, R=600 Ohm
  • Crosstalk: -95dB; -20dBFS input, 20Hz–20kHz

Featured Articles