High-quality passive audio interface uses 8 transformers to separate input and output signal grounds, isolating 2 systems and reducing hum and ground-loop noise. The T8's audio transformers have flat, wide frequency response and handle high signal levels while maintaining an isolated balanced output. This allows a clean, neutral sound with a wide v... Click To Read More About This Product
In Stock & Ready To Shipin_stock
High-quality passive audio interface uses 8 transformers to separate input and output signal grounds, isolating 2 systems and reducing hum and ground-loop noise. The T8's audio transformers have flat, wide frequency response and handle high signal levels while maintaining an isolated balanced output. This allows a clean, neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed for 600 ohm to 100kOhm impedance. XLR, 1/4", and RCA connections on all inputs and outputs offers connection versatility. Reversible mounting ears allow either the XLRs or the 1/4" and RCA jacks on the front. The T8 fits easily into virtually any audio system and is a clean patch point between all types of systems.
The T8 works great as an interface between a computer-based audio workstation and a monitor system, isolation on long cable runs in a fixed installation, isolation of multiple signal sources from recording equipment, or a safer connection between 2 audio systems. Comes in a road-rugged 19", 1U all-steel black case.
High-quality passive audio interface
8 transformers to separate input and output signal grounds
Clean, neutral sound with a wide variety of signal sources
XLR, 1/4", and RCA connections on all inputs and outputs
Reversible mounting ears
19", 1U all-steel black case.
Frequency Response: 10Hz”50kHz, +/-0.5dB @ +4dBu
THD: 0.01% Typical @ 1kHz, +18dBu, <0.1% @ 100Hz, +24dBu Ref: 0dBu = 0.775VRMS
Channel Separation 90dB typical
CMRR: 60dB typical
Phase Error less than 5%, 20Hz”20kHz
Insertion Loss: 0.4dB @ 100kOhm Load, 5.5dB @ 600 ohm Load
Input Connections: XLR female balanced, o" TRS balanced, and RCA type phono jacks
Output Connection: XLR male balanced, o" TRS balanced, and RCA type phono jacks
Power Requirements: Totally Passive
Dimensions: 1.75"H x 19"W x 3.75"D (44.5mm x 482.6mm x 95mm)
Weight: 3.75 lbs. (1.7kg)
Guitar Center's Pro Coverage
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.
Reviewed by 1 customer
Displaying review 1
Comments about Art T8 8-Channel Transformer Isolator:
Play mostly at home. Have collected 4 amps over the years and wanted to make life easier by connecting my amps and pedals thru a foot switcher. I then discovered gound loop hum. After some research and listening to an interview with Sheryl Crows' guitar tech, I discovered I needed an audio ground loop isolator. I checked out several other products and even purchased some mid priced isolators that only had RCA connectors (and required adapters). I decided to try this unit out. It is built well, has a great price for 8 isolators, and it can accept phono, RCA, and XLR input/outputs (which gives great flexibility without adapters). They also publish their specs, most don't. If you don't use a buffered or adjustable output to drive these isolators you will notice a drop in volume and apparently this is normal for all isolators. Have essentially no tone change with these and that was my biggest concern and the ground loop hum problem is solved.
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.