Skip to main content Skip to footer
Call 866-498-7882 and get 15% off a total purchase of $99+Get Details

Numark OMNI CONTROL DJ Control Surface

Item #: 
  • Write a Review
Product Description:

Numark OMNI CONTROL is all you need to plug directly into any sound system and perform. This high-quality, rugged DJ control unit is a performance hardware controller that comes with two DJ software applications and houses a professional digital audio interface to feed your headphones and the sound system.This complete, professional, computer-based...  Click To Read More About This Product

We're sorry – we no longer carry this item

Find a similar product below or contact us for a recommendation of a great alternative.

Call Us: 866-498-7882

Numark OMNI CONTROL is all you need to plug directly into any sound system and perform. This high-quality, rugged DJ control unit is a performance hardware controller that comes with two DJ software applications and houses a professional digital audio interface to feed your headphones and the sound system.

This complete, professional, computer-based package of DJ equipment consists of a hardware controller with internal audio interface and Native Instruments' TRAKTOR LE and MixMeister Fusion Live DJ software. You will immediately appreciate OMNI CONTROL's sturdy, heavy metal construction. It'll stay in place even when your fast-scratch technique gets aggressive. Your hands will immediately notice the selection of stiff, reliable knobs, faders, and buttons for precision performances. An extremely clean, topnotch sound card and ultralow latency 44.1kHz and 88.2kHz-audio ASIO drivers deliver clean feeds and pristine audio signal to two stereo outputs and your headphones. You can even plug in a microphone and talk over your mix.

The DJ software
Native Instruments TRAKTOR LE is among the most popular DJ software titles for a reason: it rocks! It's compatible with Mac and PC, and works with nearly any audio format. MixMeister Fusion Live is the DJ software for performers who want to perfect the production of their performances. Because Numark OMNI CONTROL sends MIDI data over its USB connection, you can also use it to perform with most MIDI software.


  • Complete professional computer-DJ package
  • Hardware controller with built-in audio I/O
  • Includes Native Instruments TRAKTOR LE and MixMeister Fusion Live software
  • Heavyweight, sturdy feel
  • Extremely clean, high-quality sound card
  • Stiff, reliable knobs, faders, and buttons
  • Supports MIDI over USB
    • 2 beat and tempo synchronizable decks
    • Instant loop function
    • 4 amazing master FX
    • Ultra-fast database browsing and iTunes import
    MixMeister Fusion Live
    • Native Mac OSX version is universal binary for PowerPC or Intel processors
    • Improved time stretching accurately matches beats with fast or slow tempos
    • Enhanced timeline display provides clear division of measures
    • Effect automation via MIDI controllers ” External hardware can now manipulate effect parameters
    • Support for stored EQ settings in transition templates for advanced users
    • Fade and Cue Next feature fades and pauses your mix then starts at the next track ” prefect for voice over announcements
    • New master volume control for preview output”headphone and main out can be controlled independently
    • Play a live set while you preview any moment in your upstream mix
    • Manipulate your mix in real time with a wide range of MIDI hardware controllers
    • See your music take shape with an advanced timeline view
    • VST audio effects (included) to process part of a track or your entire mix
    • Mix up to 8 songs simultaneously with perfect sync
    • Play with on”the”fly looping and remixing functions
    • Change the tempo of a song without changing key
    • Burn a flawless copy of your set to CD
    • OMNI CONTROL control surface
    • Software CD
    • USB cable
    • Owner's manual
    Native Instruments TRAKTOR LE requirements
    • Windows XP (SP2), Pentium III 1 GHz or Athlon XP 1.4 GHz, or Windows Vista (32-bit), 512 MB RAM
    • Mac OS 10.4, G4 1.5 GHz or Intel Core Duo family, 512 MB RAM
    MixMeister Fusion Live Minimum Requirements
    • Win:
    • Windows XP or Vista
    • Intel Pentium or AMD Athlon 1.0 GHz or higher
    • 1GB RAM
    • Second sound card or ASIO-compliant multi-channel sound card required for live monitoring
    • Minimum MAC Requirements
    • Mac:
    • Mac OS X 10.4 or above
    • PowerPC or Intel Core Duo 1.6 GHz or higher
    • 1GB RAM
    • Second sound card or CoreAudio-compliant, multi-channel sound card required for live monitoring
    Pro Coverage
    Manufacturer's Warranty
    No warranty on faders. 3 year warranty on mixers. One year warranty on all other products.

    Customer Reviews
    Questions & Answers View All

    Review Snapshot

    by PowerReviews
    NumarkOMNI CONTROL DJ Control Surface

    (based on 5 reviews)

    Ratings Distribution

    • 5 Stars



    • 4 Stars



    • 3 Stars



    • 2 Stars



    • 1 Stars



    Reviewed by 5 customers

    Displaying reviews 1-5

    Back to Top

    (33 of 37 customers found this review helpful)


    Great mixing, okay eq's

    By House man

    from WV

    Comments about Numark OMNI CONTROL DJ Control Surface:

    I'd give it a 3.5 if possible Worked with Traktor LE or Traktor 3 and OSX 10.5.6 flawlessly. The product appears sturdy and well built. The pitch slider and jog wheels are easy to adapt to and work well (only mixed vinyl until now). However, using the built in eq's and faders isn't an option (for me anyways). For one, it's too tight and your hands can easily bump the jog wheel while mixing. Also, using traktor to crossfade and eq is awful. I imagine this is the case with all controllers. It just can't compare to a regular analog mixer Luckily, you can route out each deck to your regular mixer and use that to mix and the omni control to beat match. I'm happy with the purchase as I can use the same mixer for the omnicontrol and turntables. If you've never mixed before, you might not mind but if you're used to analog dj mixers, just route it to your mixer.

    (13 of 17 customers found this review helpful)


    Toy at best.

    By Informed Opinion

    from Little Rock, AR

    Comments about Numark OMNI CONTROL DJ Control Surface:

    I made the mistake of attempting to use this as a professional piece of hardware for a DJ set at a bar. This was two weeks after my OMNI Control arrived in the mail. The built in sound card crashed 4 times during my 3 hour set. It produced a horrible noise at random, which could only be stopped by shutting down Traktor, mid song. It was embarrassing. I've used Traktor with other hardware before and after on the same laptop and never had this described problem. This was my first and will most definitely be my last gig using this unit, and last time to buy anything made by Numark. A couple of the buttons stopped working a few times during practice sessions at home as well. If you are looking for a toy to play with, then buy all means, spend the money if you think it's worth it. If you need a professional controller, don't expect to be able to spend less than four digits. I've tried it and haven't figured out how to do it yet. Also Numark's customer service when dealing with this problem I found to be unacceptable.

    (9 of 10 customers found this review helpful)


    Not Bad

    By Nick

    from Irvine

    Comments about Numark OMNI CONTROL DJ Control Surface:

    I'm a pro DJ, who has messed w/ EVERYTHING - Serato, CDJ's, Technics, etc. who just wanted something to have on my desktop to review some mixes. I must say, w/ traktor PRO, maybe a independent sound-card (optional w/ Omni-control) KNOWING your latency settings* (clicking), and having a DECENT computer - 2gb of ram or higher, low memory usage, etc. this is a great tool, UNLIKE some of the reviews I have read. I wouldn't recommend it for a huge gig for 2+ hour dependability/perfect mix, but it would be perfectly fine for a house-party or so to rock.

    (9 of 9 customers found this review helpful)


    8months and it works great!

    By Cooper Brown

    from simi valley, CA

    Comments about Numark OMNI CONTROL DJ Control Surface:

    I work for my own dj company and am busy with about 3 events every month. When I looked into getting into DJing a year ago I knew I wanted a mixer/controller in one and wanted to use my huge music library on my labtop so this was perfect! Its a bit small and the scratch pads are mostly just for finding your way through a track, although I occasionally used them to scratch. The knobs are tight and I like how the buttons light up when pressed. I still haven't upgraded to the full version of traktor as I am a simple DJ, i just play what people want and fade in and out with simply cross over effects, works great! No problems, only two cables to get this to work and have no complaints! As a first time DJ I do recommend this to others starting out as its a professional, high quality mixer/controller that does almost everything you need it to do. Traktor is a nice program and this is a great mixer to get yourself started!

    (1 of 1 customers found this review helpful)


    Second Thoughts On My Onmi

    By Dj Papi

    from Houston, TX

    Comments about Numark OMNI CONTROL DJ Control Surface:

    It has been a year now, since I have owned the OMNI Controller. For the most part, it operates good. Lately, it seems to have mood swings beyond my control. I decided to play with this at home before I converted to fully digital deejaying. Since I work at a bar, I figured it would be a great tool to use for live mixing. It was until recently. First off, my laptop has no programs extra on it that would cause such drama. First, if you leave Traktor stationary for a few minutes, 2 things may happen. The OMNI will lock up (the traktor will go into default screen and the song will play for about 5-10 seconds before it shuts off) and 2: the songs will play this static-y hissing sound on all tracks. I've had to shut down OMNI to reboot. Other times, TRKTOR decides to shut down in the middle of mixing. I haven't figured that one out yet. Also, my right side play button stopped working. so I have to make sure I have enough time to mix out when it does decide to play. And finally, I've had to invest in a pack of vinyl bumpers (the plastic "feet" that hold system up) since after a month of using it at the bar, the feet started coming off! Also, make sure your volume knobs are tweaked before you start your set. The volume will jump 4 or 5 decibels if you slightly turn up the volume during live playing. I've seen patrons literally jump because the volume raised so loud! I thought a $350 system would be built better than this. Other than these things, the OMNI works good. I'm looking to upgrade! I can't deejay a gig with these uncertainties.

    Displaying reviews 1-5

    Back to Top

    You are changing the Ship-To country.

    Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.