Gallery
Description
Features
Specs
Reviews
Q&A
Musician's Gear

collapse expand iconDescription

The Musician’s Gear KBX1 Single-Braced Keyboard Stand is the ideal and affordable stand for small and medium-weight keyboards. Its six adjustment settings provide a custom setup for optimal placement, while its spring-loaded handle offers quick, on-the-fly changes. It's made with heavy-duty steel construction and non-slip rubber end caps so your instrument stays where you put it.
Musician's Gear KBX1 Single-Braced Keyboard Stand Black
Musician's Gear KBX1 Single-Braced Keyboard Stand Black
Musician's Gear KBX1 Single-Braced Keyboard Stand Black

collapse expand iconFeatures

  • Ideal for small and medium height keyboards
  • Six adjustment settings for custom setup
  • Easy-release handle for quick adjustments
  • Steel construction with non-slip end caps
warning

WARNING: This product can expose you to chemicals including Cadmium, which is known to the State of California to cause cancer, and Cadmium, which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

collapse expand iconSpecs

General
  • Maximum load: 35 lb.
  • Travel dimensions (LxW): 38" x 17"
  • Keyboard arms (W): 14"
  • Foot bars (W): 17"
Adjustable Height/Width Settings (HxW):
  • 1: 36.5: x 9"
  • 2: 34.25" x 15.25"
  • 3: 31.5" x 20.25"
  • 4: 28.25" x 25"
  • 5: 24" x 29"
  • 6: 19.5" x 32.5"

Featured Articles

collapse expand iconReviews

3.89

56 Reviews

76%

of respondents would recommend this to a friend

Most Liked Positive Review

5

Read the Instructions.

Well, maybe I'll learn how to play the Piano. As well as the 'Piano Man' (me), and the 'Honky Kat' (me), when I was playing a Guitar. I asked people if they could play those songs on a Piano and a Billy Joel (a new name, fresh from my newly released Album) said he could and a Elton John (new name, fresh from my next? newly released Album) said he could, also. So what about me. I hope so, too. The keyboard stand, when you finally look at it carefully, has legs that are equal length, or if you rather, equal spacing from the wall. Just look at it carefully, you'll get there. It's look like it will work fine.

VS

Most Liked Negative Review

1

Wobbly and unstable. Do not buy!

I used this stand for a Yamaha P-45 keyboard. The stand wasn't too hard to put together once I figured out the offsetting part, but the instructions were horrible at explaining it. The stand was an immediate disappointment once I put my keyboard on it. The bars up top were too wide, so the rubber grips didn't make contact and the hard plastic under my keyboard was sitting on bare metal. When I actually sat down to play, the stand wobbled even when I played softly. I had tightened all the screws correctly and the stand was level. The whole thing is just horribly flimsy and I'll be returning it. Ended up getting a heavy-duty Z stand from Pyle instead. Five stars for that one!

Filters
Best Uses
  1. Home Studio22
  2. Performances7
  3. Amateur Recording5
  4. Outdoor Events / Games4
  5. Pro Audio / DJ / Mixing2
Cons
  1. Unstable11
  2. Flimsy9
  3. Not Functional2
  4. cheaply made.1
  5. Loose thread on screws once tighten1
Describe Yourself
  1. Experienced18
  2. Novice17
  3. Professional Musician4
Pros
  1. Portable29
  2. Compact28
  3. Stable20
  4. Holds Items Securely18
  5. Inexpensive1

Reviewed by 56 customers

  • A little thin, but sturdy

    4

    Verified BuyerVerified Buyer

    submitted6 months ago

    byRichelle

    fromOakland, OR

    Submitted as part of a sweepstakes

    We use the stand just at home, but it was very easy to set up, so I'm sure it would be perfect for travel/events as well. The frame is a little on the thin side, but still very sturdy, and has a lot of position options.

  • I would buy this again.

    5

    Verified BuyerVerified Buyer

    submitted6 months ago

    byRonnie

    fromMemphis, TN

    Submitted as part of a sweepstakes

    Someone said it would be flimsy. Was plenty sturdy, for my mom's $150ish Yamaha.

  • Excellent keyboard stand

    5

    Verified BuyerVerified Buyer

    submitteda year ago

    byKen

    fromHenderson, NV

    Submitted as part of a sweepstakes

    I needed a keyboard stand for a USB MIDI keyboard. After reviewing the listings, I selected the Muscian's Gear keyboard stand. Great choice. Very well made. I will buy it again.

  • Definitetly Not!

    1

    Verified BuyerVerified Buyer

    submitted2 years ago

    bykevin

    fromHarford Co., Md.

    Submitted as part of a sweepstakes

    I rarely write reviews (oddly enough I recently reviewed an inexpensive digt. piano from one of GC other co. MF and if possible I would have giving it 10 stars}, Before even opening the box I could smell rubber/oil, the unit has rubber sleeves on the upper and lower bars,Once I put it together the lower portion that rest on floor was uneven (wobbeled), trying to adjust it and tighten screws - screw head strip right out, the smell was getting a little to strong, so placed in garage.Next day when smell was still very strong, took it over and throw it in a Dumpster. I was going to send it back , but did not want to deal with that smell and GC is about a 50 min. drive from me.The one I recieved could have been the oddball out.But this stand was not worth the Hassle for ME.

  • Wobbly and unstable. Do not buy!

    1

    submitted2 years ago

    byStefania

    fromSalt Lake City, Utah

    I used this stand for a Yamaha P-45 keyboard. The stand wasn't too hard to put together once I figured out the offsetting part, but the instructions were horrible at explaining it. The stand was an immediate disappointment once I put my keyboard on it. The bars up top were too wide, so the rubber grips didn't make contact and the hard plastic under my keyboard was sitting on bare metal. When I actually sat down to play, the stand wobbled even when I played softly. I had tightened all the screws correctly and the stand was level. The whole thing is just horribly flimsy and I'll be returning it. Ended up getting a heavy-duty Z stand from Pyle instead. Five stars for that one!

  • Not sure

    3

    Verified BuyerVerified Buyer

    submitted3 years ago

    byLisa

    fromMA

    I'm using this to support a keyboard

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • submitted2 years ago

    asked byMARC

    fromDallas , TX

    Hi , will this stand be safe and comfortable to use on a Yamaha e643 piano keyboard

    Hi , will this stand be safe and comfortable to use on a Yamaha e643 piano keyboard

    Open Reply - Thomas
    Yes

  • submitted3 years ago

    asked bySy

    from77008

    This one doesn't come with screws? What kind of screw does it need?

    This one doesn't come with screws? What kind of screw does it need?

    Open Reply - Thomas
    It will come with everything required.

  • submitted4 years ago

    asked byAmreen

    fromSan Francisco

    Does this support Yamaha p125 digital piano?

    Does this support Yamaha p125 digital piano?

    Open Reply - Thomas
    Yes

  • submitted4 years ago

    asked byBryan

    fromColorado Springs, Colorado

    We had ordered a musicians gear keyboard stand item number KBX1 but we did not receive the screws to put it together. Please tell us what kind of screws we need. Thank you very much.

    We had ordered a musicians gear keyboard stand item number KBX1 but we did not receive the screws to put it together. Please tell us what kind of screws we need. Thank you very much.

    Open Reply - Beau
    Please give us a call at 866-498-7882 or email us with your order number and we should be able to have the missing screws sent to you.

  • submitted4 years ago

    asked byMarilyne

    fromundisclosed

    What screws done with the stand? What are the name of the screws? I got this stand as a gift without the screws. Model KBX1 and I need the screws. Please. Can someone open the box and see what screws are in there? Thanks

    What screws done with the stand? What are the name of the screws? I got this stand as a gift without the screws. Model KBX1 and I need the screws. Please. Can someone open the box and see what screws are in there? Thanks

    Open Reply - Kenneth
    Please contact a Sales Agent for special order placement

  • submitted5 years ago

    asked bySIMONE

    fromCalifornia

    What is the authorization code? I want return a product that is out of stock and pending for shipping.

    What is the authorization code? I want return a product that is out of stock and pending for shipping.

    Open Reply - Kenneth
    Please contact our Customer Service agents for specific return inquiries

  • submitted5 years ago

    asked byJulia

    fromQuakertown Pa

    WIll this stand fit YPY Yamaha eletric Piano?

    WIll this stand fit YPY Yamaha eletric Piano?

    Open Reply - Kenneth
    Yes, this will be compatible

  • submitted6 years ago

    asked byMarc

    fromundisclosed

    How do I tighten the middle pin?

    How do I tighten the middle pin?

    Open Reply - Kenneth
    Please contact a Customer Service Agent for trouble shooting inquiries