Skip to main content Skip to footer
Check out some of our favorite ways to record guitar Get Details
  •  Español 877-687-5402
  • Stores
On Sale

Markbass CMD 102P 300/500W 2x10 Tilt-Back Bass Combo Amp

Item #: 
1274319726189   POS #:103837142
Product Description:

The Markbass CMD 102P is a tilt-back bass combo amplifier that has a built-in Little Mark II solid state preamp to give you more power. To help shape your sound, the CMD 102P bass amp gives you a 4-band EQ, as well as VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters for control. The Markbass CMD 102P amp's I/O include...  Click To Read More About This Product

In Stock & Ready To Ship

  • Protect Your Gear
  • Free Shipping
  • International Shipping
Have Questions? 866-498-7882
Call our experts for product info and phone-only specials.
Save 
$200.00
Was: 
$1,199.99
Gear returned in mint condition. If you're looking for a virtually new instrument in possibly less-than-perfect packaging, this is a great value.
  • Includes 45-Day, No-Hassle Returns
  • Includes full manufacturer's warranty
Gear returned in great condition, with only minor signs of use, such as slight scuffs or pick marks. It looks and plays like new and may be considered an equivalent to display units found in retail stores.
  • Includes 45-Day, No-Hassle Returns
  • Includes full manufacturer's warranty
$999.99
Guitar Center Gear Card
$28/month  for 36 months*

0% Interest for 36 months* + $49 back in rewards. 36 equal monthly payments required. Valid through 10/31/2018
Get DetailsAbout Special Financing Offers Opens in new window

    Warranty Options
Add to List
Free Store Pick Up: Available Today
Fairfax, VA
View More Stores For Availability Store Information


,
SUN:11AM-7PM
MON-FRI:10AM-9PM
SAT:10AM-8PM
Overview

The Markbass CMD 102P is a tilt-back bass combo amplifier that has a built-in Little Mark II solid state preamp to give you more power. To help shape your sound, the CMD 102P bass amp gives you a 4-band EQ, as well as VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters for control.

The Markbass CMD 102P amp's I/O includes an input that can handle both passive and active basses, and extra XLR balanced input for double bass pickups, Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables, a tuner out jack for sending unbalanced signals to a tuner, amp, or other recording equipment, and Send and Return Effect jacks to ensure your main signal continues even if something dies in your effects chain. This versatile bass combo has an angled cabinet so that you can use it as a floor model or in the more traditional vertical position. Either way, you're going to get a warm, natural sound from the 2 Markbass custom 10" speakers and the piezo tweeter. And if you add an external cab via the outputs, the CMD 102P combo amp will give you enough sound to fill a large venue with headroom to spare.

Features

  • Solid state Little Mark II preamp built-in to the front
  • 2 - 10" Markbass custom neodynium speakers
  • Piezo tweeter
  • Made of high-grade, multi-ply poplar
  • Glued, screwed, and sealed internally with special compounds for maximum sound quality
  • Lightweight
  • Angled cabinet design so it can be used either as a floor monitor or vertically
  • Grille screen to protect speakers
  • Little Mark II
    • Provides 500W at 4 ohm or 300W at 8 ohm
    • Gain and Master volume controls
    • Clip warning light
    • EQ includes controls for Low, Mid Frequency Low, High Frequency Low, and High
    • VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters
    • Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
    • Balanced XLR out
    • Ground lift switch to eliminate hum
    • Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
    • Send and Return Effect ensures main signal continues even if something dies in your effects chain
    Specifications
  • Speaker: 2 x 10"
  • Tweeter: piezo
  • Bass port: front
  • Impedance: 8 ohms
  • Sensitivity: 101 dB SPL
  • Speaker power handling: 400W RMS (AES Standard)
  • Frequency response: 40Hz to 18kHz
  • Crossover frequency: 3kHz
  • Dimensions: 18.9"W x 23.4"H x 18.7"D
  • Weight: 44lb.
  • Little Mark II
      Power
      • Input impedance: 500Kohm, max. voltage: 15Vpp
      • Balanced Output (XLR): 22Kohm, max. voltage 25Vpp
      • Effect Return impedance: 22Kohm, max. voltage: 25Vpp
      • Output Power: 300W RMS at 8 ohm, 500W RMS at 4 ohm
      • Voltage is factory preset for the U.S.
      Controls
      • GAIN ”80dB to +23dB range
      • MASTER VOLUME
      • GROUND LIFT: switch on rear panel
      Equalization
      • LOW
      • Center frequency: 40Hz; level ±16dB
      • LOW MID
      • Center frequency 360Hz, level ±16dB
      • HIGH MID
      • Center frequency 800Hz, level ±16dB
      • HIGH
      • 10kHz shelf; level ±16dB
      • VPF (Variable Pre-shape Filter)
      • center frequency 380Hz (cut)
      • VLE (Vintage Loudspeaker Emulator)
      • frequency range 250Hz”20kHz (cut)
      Outputs
      • EFFECT SEND
      • Unbalanced, max. voltage 20Vpp (pre-EQ)
      • TUNER OUT
      • Unbalanced, max. voltage 25Vpp
      • LINE OUT
      • Balanced XLR, max. voltage 10 Vpp
      • SPEAKER OUT
      • Speakon, 1/4"
      Pro Coverage

      Guitar Center's Pro Coverage
      Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.

      Pro Coverage includes
      • Accidental damage protection
      • Expedited repair or replacement
      • Free shipping (for returns or repairs)
      • 100% coverage for commercial use
      • Extended price protection
      • No lemon guarantee
      • Free transfer of coverage to a new owner
      • Repair costs covered for up to five years from date of purchase
      • Repair authorization-toll-free by phone or via the web
      You are changing the Ship-To country.

      Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.