Specially useful for midband oriented instruments such as guitars, vocals, harmonicas, and violins, the Manley Mastering Mid Frequency Enhanced Pultec EQ (MEQ-5 type) shares the same features and specifications as the Manley 'EQP-1A' version. The differences lie in the passive EQ section: In the MID EQ, the DIP and PEAK controls function on much sh... Click To Read More About This Product
Find a similar product below or contact us for a recommendation of a great alternative.
Specially useful for midband oriented instruments such as guitars, vocals, harmonicas, and violins, the Manley Mastering Mid Frequency Enhanced Pultec EQ (MEQ-5 type) shares the same features and specifications as the Manley 'EQP-1A' version. The differences lie in the passive EQ section: In the MID EQ, the DIP and PEAK controls function on much sharper bell-shaped curves centered on the selected frequencies, which gives the engineer-producer more precise control over the vitally important midrange and makes this equalizer indispensable for mastering engineers. On the Manley Mastering Pultec EQ, the switches are built as 11 x 0.5dB steps for max range of 5.5dB on each control. The BANDWIDTH control is also built as 11 steps on a switch instead of a pot.
The MID EQ also completely fills the frequency gaps between the low frequency and high frequency sections of the Manley Enhanced Pultec EQP-1A type EQ; thus the combination of the two provides a most flexible palette of possibilities for tracking or mastering.
Manley All Tube Mid Frequency EQ
Manley input transformer with pure nickel laminations potted in mu-metal case. 3K ohm input Z
PHASE REVERSE switch for balanced XLR input
Alternate transformerless ¾" HI-Z (5K ohm) input
BYPASS switch & AUTO-MUTE w/warmup delay
Silent conductive plastic PEAK & SHELF controls
Sealed gold-contact Greyhill frequency select switches
Hi-current drive <50 ohm LO-Z XLR & ¾" outputs
Balanced Transformer Coupled XLR Outputs
Flat frequency response from 10Hz-70KHz
<0.01% THD @ 1Khz
S/N Ratio: 116 dB
Adjustable FEEDBACK / GAIN: Unity ±5 dB
Maximum output: +30 dBv
Power consumption: 18 watts
Operating mains voltage: Units are purpose built for original destination country's mains voltage:
100V, 120V, or 220-240VAC as indicated on the serial number badge. Power transformer must be replaced in order to change mains operating voltage.
120VAC units may NOT be rewired to put the primaries of the power transformer in series for 220-240V operation or a large radiated field of hum will develop. If changing locations/voltages, the power transformer must be replaced with the dedicated one for the voltage at which it will operate.
Mains Voltage Frequency: 50 œ 60Hz
Dimensions: 19" x 1¾" x 10" (occupies 1u)
Weight: 10 lbs.
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.