The LaChapell 583E is a tube mic pre with EQ that works with any 500 series chassis. The 583E tube mic pre has an EQ section that can function in series with the preamp or independently as a preamp and an EQ. The 583E tube mic pre features a single-channel vacuum tube preamplifier with LaChapell’s proprietary TrueTube technology. TrueTube delivers 250V to the tube, properly powering it so that it operates at its full potential and is not starved for power like other tube designs for the 500 series chassis. Cinemag input transformers, Jensen output transformers and other high-quality components have been carefully selected to ensure the signal chain is not compromised.

In addition to the preamp, the 583E features an ultra-clean EQ section that can follow the preamp or operate as a separate module. Address either of the two XLR inputs on a 500 series chassis to access either the preamp or the EQ or both in series.

The EQ draws from the LaChapell 503 500 series module and features the same very low distortion signature with minimal phase deviation. Perfect for tracking or mixing, the 583E tube mic pre with EQ is great on any source when tracking, or an outboard EQ for mixing.
  • Dual drive knobs
  • TrueTube 250V power
  • Clean and transparent EQ section
  • Boutique-quality transformers
  • Front-panel Hi-Z input
  • Internal Gain: 0 to >72dB
  • THD+N: 0.10% (minimum)
  • Frequency Response: 10Hz to 50KHz
  • Max Output: (1% THD+N) +26dBu
  • Typical EIN: -121dBu
  • Input Impedance: 1.5KΩ
  • Transformers: CINEMAG (Input), Jensen (Output)
  • Tube Compliment: 1 x 12AX7 / ECC83
  • Nosie Floor: -95dB
  • THD+N: 0.012% (@ +4 output)
  • Frequency Response: 10Hz to 50KHz (flat)
  • Cut/Boost Range: +/- 8dBu
  • Maximum Input Level: ≥25dB
  • Input Impedance: 48KΩ
  • Input/Output Type: Transformerless

Featured Articles