Focusrite RedNet 2 - 16-Channel AD/DA Interface

RedNet is Focusrite's flagship range of Ethernet-networked studio interfaces, based around the tried and tested Dante Ethernet audio networking system from Australian company Audinate. Focusrite's RedNet is the first to offer IP network audio interfaces for the recording studio - or any application that requires moving high quality audio around with ultra-low latency.

RedNet 2 adds 16 remote-controlled analogue channels in and out to your RedNet network and can be located anywhere you can run an Ethernet cable. Featuring Focusrite's precision 24-bit A-D and D-A conversion for superb audio performance, it delivers 119dB dynamic range at sample rates up to 192kHz. The rear panel includes standard DB25 connectors for analog patchbay or breakout cable interfacing.

RedNet 2 can be used simply as a means of converting 16 channels of audio and delivering it some somewhere else on the network at near-zero latency. If you need to connect RedNet 2 to your computer there are three methods:

¢ The RedNet PCIe card for Core Audio and ASIO applications such as Logic and Nuendo
¢ RedNet 5 for Pro Tools HD, Pro Tools HDX and Pro Tools HD Native via DigiLink connectors
¢ Directly to your computer's Ethernet port using a standard Ethernet cable (with "Dante Virtual Soundcard")

• Analogue line inputs: 16
• Connector: 25-way female Dsub x 2, wired to AES 59
• 0 dBFS reference levels: +18 or +24 dBu (switchable)
• Frequency response: 20Hz - 20kHz ±0.05 dB
• THD+N: < 0.001% unweighted; -1 dBFS input, 20 Hz - 22 kHz
• Dynamic range: 119 dB ˜A'-weighted (-60 dBFS method)
• Converter dynamic range: 120 dB
• Signal-to-noise ratio: 119 dB ˜A'-weighted; 20 Hz - 20 kHz

• Analogue line outputs: 16
• Connector: 25-way female Dsub x 2, wired to AES 59
• 0 dBFS reference levels: +18 or +24 dBu (switchable)
• Frequency response: 20Hz - 20kHz ±0.15 dB
• THD+N: < 0.001% unweighted; -1 dBFS input, 20 Hz - 22 kHz
• Dynamic Range: 119 dB ˜A'-weighted (-60 dBFS method)
• Converter dynamic range: 120 dB
• Signal-to-noise ratio: 119 dB ˜A'-weighted; 20 Hz - 20 kHz

• Input or Output to Input: < -90 dB (all other channels at 0 dBFS)
• Input or Output to Output: < -100 dB (all other channels at 0 dBFS)

• Supported sample rates: 44.1 / 48 / 88.2 / 96 / 192kHz
• Clock sources: Internal or from network master device

• PSU: Internal, Universal type, consumption 30 VA

• Power: Green
• Network connected: Green
• Sync lock: Green
• Sample rate: Yellow x 5
• Input/Output range: Yellow x 2
• Input/Output signal level: Bi-colour x 32 (Green = -42 dBFS; Orange = -6 dBFS; Red = overload)

Guitar Center's Pro Coverage
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.