D2 is a software-based digital equalizer designed for Pro Tools TDM-based systems. Provides 3 different mono or stereo modules: 6 band, 4 band, and dual/single band. These versatile configurations allow DSP power to be used where it is needed most. Any band type can be accessed up to the available DSP power in the system. Includes high- and low-pas... Click To Read More About This Product
D2 is a software-based digital equalizer designed for Pro Tools TDM-based systems. Provides 3 different mono or stereo modules: 6 band, 4 band, and dual/single band. These versatile configurations allow DSP power to be used where it is needed most. Any band type can be accessed up to the available DSP power in the system. Includes high- and low-pass filters, high- and low-shelving filters and high-mid and low-mid peaking filters. D3 is a world-class, software-based compressor/limiter for Pro Tools TDM and AudioSuite-capable systems that provides 2 mono or stereo configurations.
Modeled on the highly acclaimed Red 2 equalizer
6-band, 4-band, dual-/single-band, stereo or mono modules
EQ curve display supplies visual feedback of parameters
Left/right controls can be adjusted independently, then linked to retain the offset
3 different mono or stereo modules: 6-band, 4-band, and dual-band/single-band provide maximum DSP efficiency
Consists of high- and low-pass filters, high- and low-shelving filters, and high-mid and low-mid peaking filters
Automation features include Dynamic TDM Plug-In automation
Can be used as an AudioSuite or RTAS plug-in for file-based or realtime host processing (RTAS version requires Pro Tools 5.1 or higher)
Modeled on the highly acclaimed Red 3 Dual Compressor/Limiter
2 separate plug-in configurations (compressor+limiter, or compressor/limiter), allowing for maximum DSP efficiency
AudioSuite functionality for file-based processing, allowing DSP power to be allocated where it is needed most
Support for Pro Tools new MultiShell DSP sharing on Pro Tools/24 MIX and MIXplus systems
Allows audio processing of the plug-in to be controlled by an external track
AudioSuite and RTAS plug-ins included
D3 can be used as an AudioSuite or RTAS plug-in for file-based or realtime host processing, allowing DSP power to be allocated where it's needed most
Requirements: Digidesign approved TDM-equipped Pro Tools system running 5.1 software or higher for RTAS support
All Focusrite products are built to the highest standards and should provide reliable performance for many years, subject to reasonable care, use, transportation and storage.
In the event of a Manufacturing Defect becoming evident within 12 months from date of purchase Focusrite undertakes that the product will be repaired or replaced free of charge if the product is returned to the authorised dealer from whom it was purchased. In these circumstances, or if you need an out-of-warranty repair to your Focusrite product, please contact your local Focusrite distributor in your country of residence or business : Find your local distributor here and you will be advised of the correct return procedure.
Alternatively contact the Focusrite Reseller from which you purchased the product. If you purchase a Focusrite product outside your country of residence or business you will not be entitled to ask your local Focusrite Distributor to honour this Limited Warranty, although you may request a chargeable repair.
Alternatively, the unit may be returned at your cost to the dealer you purchased the unit from so that they can organise a Warranty repair with their Focusrite Distributor.
This Warranty does not include cost of shipping to and from the authorised dealer from whom it was purchased. In every case it will be necessary to provide the original invoice or store receipt to accompany the defective product to the supplying dealer. This Limited Warranty is offered solely to the first purchaser of the product from an Authorised Focusrite Reseller (defined as a reseller which has purchased the Product directly from Focusrite Audio Engineering Ltd. in the UK or its Authorised Distributors outside the U.K,) and is not transferable.
This Warranty is in addition to your Statutory Rights in the country of purchase.
Please note: A Manufacturing Defect is defined as a defect in the performance of the product which may be expected from a reasonable interpretation of the published description and performance specifications as published by Focusrite Audio Engineering Ltd. This does not include damage caused by post-purchase transportation, storage or careless handling, nor damage caused by misuse.
A significant proportion of products returned under Warranty (which are very few in number compared to numbers sold) are found not to exhibit any fault at all. Please check that the mains voltage is correctly set for your local supply and that your connecting cables are in good order and correctly connected.
If in doubt about the product functions please read the user guide and if necessary contact your dealer for advice before returning the product to the supplying dealer. You can also contact the Focusrite Tech Support team at the Focusrite Answerbase for general advice.
You are changing the Ship-To country.
Our product catalog varies by country due to manufacturer
restrictions. If you change the Ship-To country, some or
all of the items in your cart may not ship to the