Earthworks FlexWand FW730 with Tripod Base (Matched Pair)

The FlexWand is a combination of a 30kHz High Definition Microphone and a low profile microphone stand and boom as a single unit. It allows the microphone head to be positioned as high as 7 feet and as low as 1.5 feet from the floor or anywhere in between. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don't have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand, position it and plug the mic cable into the base.

Uniform frequency response on or off axis
Frequency response of 30Hz to 30kHz
Near perfect polar response
Perfect solution for choirs and vocal groups
Large flex section and mini-gooseneck
Substantial improvement in gain before feedback
Ideal where bands or orchestras are placed in front of a choir
Sturdy tripod base
Positioned up to 7' high

Frequency Response: 30Hz to 30kHz ±2dB at 6 inches (15cm)
Polar Pattern: Cardioid or Hypercardioid
Sensitivity: 10mV/Pa (-40dBV/Pa)
Power Requirements: 48V Phantom, 10mA
Max Acoustic Input: 145dB SPL
Output: XLR (pin 2+)
Output Impedance: 100Î, balanced (50Î ea. pin 2 & 3)
Min Output Load: 600Î between pins 2 & 3
Noise: 22dB SPL equivalent (A weighted)
Positioning Range: From 1.5 ft. to 7 ft. above floor level
Dimensions: Stand 7' 2" long (2.18m), Base 12" (30.5cm)
in diameter, (2.7cm) high
Color: Stand, flex & wand - black, base - dark gray
Weight: Stand 2 lbs. (.9 kg),

Guitar Center's Pro Coverage
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.