Behringer 960 Sequential Controller Eurorack Module

The 960 SEQUENCER CONTROLLER is an authentic reproduction of the circuitry from the “Modular 55” series used by the world’s most famous pop, rock and jazz musicians. Now you can build your own unique synthesizer that can fit in a standard Eurorack case. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that’ll fulfill any synth geek’s wildest dreams.

8 Steps of Awesome
The 960 SEQUENCER CONTROLLER is an 8-step sequencer with 3 rows of CV controls for adjusting the pitch of a signal at that stage. An additional 9th step can be used to stop the sequence. Plug in a Behringer 962 SEQUENTIAL SWITCH and transform the 960 from an 8-step sequencer into a 24-step giant capable of creating more intricate sequences and beats.

Set the Stage
More sequence variations can be achieved by switching any of the desired Stage Mode switches to Normal, which lets the current stage proceed to the next one; Skip, which lets you bypass the stage; or Stop, to freeze the sequence. You can even manually trigger each stage by pressing the respective Set button. Create an 8-step sequence, then set the 960 to skip every other stage to have a staccato rhythm and spice up a song.

The Oscillator
The 960 also comes with an oscillator where you can adjust the oscillator range or pitch with the Frequency Range knob and fine tune that with the Frequency Vernier knob. You can also manually start or stop the oscillator with the on and off buttons or connect an external gate signal to control the on/off status. A control input is available for you to connect another module to tweak the oscillator frequency of the 960 and expand its flexibility.

Eurorack Ready
Installing the 960 SEQUENCER CONTROLLER is simple, as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 960 SEQUENCER CONTROLLER to be mixed with other synth modules for a truly unique set up.

• Type: 2 x 3.5 mm TS jacks, AC coupled
• Impedance: >3 kΩ, unbalanced
• Maximum input level: +5 V

• Type: 3.5 mm TS jack, 1 V/oct
• Impedance: 100 kΩ, unbalanced
• Maximum input level: ±2 V, vernier set to 5

• Type: 3.5 mm TS jack, DC coupled
• Impedance: 7 kΩ, unbalanced
• Maximum input level: ±5 V
• Minimum switching threshold: +1.5 V

• Type: 8 x 3.5 mm TS jacks, AC coupled
• Impedance: >3 kΩ, unbalanced
• Maximum input level: +5 V
• Minimum switching threshold: +3.5 V trigger

• Type: 6 x 3.5 mm TS jacks, DC coupled
• Impedance: 500 Ω, unbalanced
• Maximum output level: +8 V (range X4)

• Type: 8 x 3.5 mm TS jacks, DC coupled
• Impedance: 250 Ω, unbalanced
• Maximum output level: +5 V, active high

• Type: 3.5 mm TS jack, DC coupled
• Impedance: 4 kΩ, unbalanced
• Maximum output level: +4 dBu
• Duty cycle: 90%

• Frequency range: 1 (0.04 to 0.5 Hz), 2 (2.75 to 30 Hz); 3 (0.17 to 2 Hz), 4 (11 to 130 Hz); 5 (0.7 to 8 Hz), 6 (44 to 500 Hz)
• Frequency Vernier: Tune the oscillator range, 3 octave range
• Oscillator on/off: Manually start or stop the oscillator
• Voltage knobs: -∞ to max voltage set by the range switch
• Mode switch: Skip stage, play stage, stop sequencer
• Set: Manually select stage
• Range switches: X1 (+2 V), X2 (+4 V), X4 (+8 V) max. output
• Timing on/off: Allows 3rd row knobs to control stage duration
• Shift button: Manually skip to next stage

• Power supply: Eurorack
• Current draw: 100 mA (+12 V), 50 mA (-12 V)

• Dimensions: 11.2" x 5.1" x 1.9"
• Rack units: 56 HP
• Weight: 1.41 lbs

Guitar Center's Pro Coverage
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.