Bartolini

collapse expand iconDescription

The NTBT is a 2-band tone control preamp with fully independent Bass and Treble controls. The voice is clear, transparent, and strong with ultra-low distortion.The NTBT features a pre-wired adjustable gain trimmer which allows you to boost the input signal up to 12dB (4X) to match the output of other instruments or tune the output to drive your level-sensitive effects. Like all of Bartolini preamps, the NTBT is internally shielded to reject electromagnetic noise and includes internal filters to block AM and FM radio on the input. Professional double tin plated pure copper wire with durable semi-rigid insulation was used to ensure the 5” pre-stripped wires don’t flop around in the cavity and the wires don’t cut through the insulation over time.

Installation is straightforward by connecting the EQ band wires to your 50KOhm linear potentiometers along with volume control, battery connection and output jack. Or you can use one of their pre-wired harnesses to make your upgrade even easier. The preamp can be used with either a single 9-volt battery (9-volt operation) or two 9-volt batteries wired in series (18-volt operation) for 6dB extra headroom with no tonal change.
Bartolini NTBT 2-Band EQ Preamp Module

collapse expand iconSpecs

Preamp Module Size
  • 1.76" [44.7mm] Long
  • 1.02" [25.9mm] Wide
  • 0.54" [13.7mm] Thick
  • Operating Voltage: 9V or 18V - Prewired for 9V with additional battery clip included for 18V wiring
  • Mid: Center @ 400Hz
  • Input Impedance: 400KΩ