BASSBOSS

Description

The BASSBOSS ZV28-MK3 dual 18" active subwoofer delivers groundbreaking performance and ultralow-frequency response. Smooth, even, accurate, clean, super high continuous and deep bass output are the key attributes of this monster sub. For super low modern bass music, just two cabinets will produce exceptional levels of extraordinarily deep bass. The ZV28-MK3 is designed to deliver an intensely physical experience for the audience.

The amplifiers and DSP feature powerful 96kHz processors with pristine sound quality and eight touch-of-a-button onboard presets. The state-of-the-art Class-D amplifier provides a true 5,000 watts of RMS power. The amplifier is truly capable of delivering continuous power, ensuring that it isn’t the limiting factor on your quest for low frequency. Additionally, by providing an abundance of power, the possibility of overheating and damage to the woofers caused by clipping is virtually eliminated. Control BASSBOSS software provides additional computer-accessible presets, networked remote control and remote DSP update capabilities. Each unit features dual Ethernet ports with a built-in network switch for computer connectivity and cascading networking ability.

IP65 waterproof connectors provide peace of mind in unpredictable environments, and the MK3 line offers 90–250VAC global power compatibility for use all over the world. The ZV28 is a vented, direct-radiating subwoofer with a large internal volume and a very low-tuned frequency. Anti-standing wave baffles and pass-through dampers minimize upper resonances while very large ports maximize low-frequency performance at high output.

The ZV28-MK3 is optimized for full-power operation. It is designed to thrive at full-rated RMS power throughout its operating range while ensuring the woofers remain within their excursion and thermal limits. The ZV28 delivers consistently flat and accurate frequency response down to 21Hz. The ZV28's sensitivity is achieved and maintained through careful optimization, the use of premium components, prodigious power and innovative DSP technologies, yielding massive low end on demand.
BASSBOSS ZV28-MK3 Dual 18" Powered Subwoofer
BASSBOSS ZV28-MK3 Dual 18" Powered Subwoofer
BASSBOSS ZV28-MK3 Dual 18" Powered Subwoofer

Features

  • Smooth, even, accurate and clean bass response
  • 96kHz processors with pristine sound quality and on-board presets
  • 5,000 watts of RMS power
  • IP65 waterproof connectors

Specs

  • Frequency response (±3dB): 24–90Hz, 21–90Hz (pair)
  • Maximum sustained output: 134dB SPL, 1 meter, half-space (ground plane)
  • Max SPL (peak): 142dB
  • Nominal dispersion (H° x V°): 360 x 360, cardioid mode available with multiple boxes
  • Amplification: 5,000W continuous RMS Class-D subwoofer amplifier
  • Processing: High and low pass, phase alignment and limiting
  • Enclosure type: Direct radiating, vented enclosure, optimally tuned for extremely low-frequency response with good sensitivity and high-power handling
  • Transducer: 2 x 18" diameter (457 mm) neodymium motor woofer with 4.5" (115 mm) copper winding voice coil and 56 mm (2.2") peak-to-peak excursion, waterproof fiber composite cone
  • Cabinet construction: 18 mm Baltic birch plywood, extensively braced, 16 fly points, 8 steel handles, 2 pole sockets, 4 large rubber feet and 4 interlocking foot pockets
  • Dimensions (HxWxD): 22.5" x 42" x 42" (23.25" high with feet)
  • Net weight: 225 lb.

Reviews

Be the first to review the Product

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • asked byMatt

    fromSandpoint Idaho

    Can you put photos of the back of the cabinet showing the amplifier and controls? Does this amp have a fan? Is it truly a 5,000 watt continuous?

    Open Reply - Gear-Support
    Unfortunately we have no additional photos available. That's what they spec. 2 x 2500.