Designed for use with a large subwoofer to create a full-range, 3-way sound system, the AT212 2-way powered loudspeaker features a tall, slim design that positions its horn above your audience when stacked. Despite its potent 3,000W RMS power module, dual 12" drivers and road-ready cabinet construction, the AT212 weighs only 89 lb., making it possi... Click To Read More About This Product
Designed for use with a large subwoofer to create a full-range, 3-way sound system, the AT212 2-way powered loudspeaker features a tall, slim design that positions its horn above your audience when stacked. Despite its potent 3,000W RMS power module, dual 12" drivers and road-ready cabinet construction, the AT212 weighs only 89 lb., making it possible for one person to maneuver and stack it with other speakers in a larger setup.
The advantages offered by BASSBOSS tops are their coherence, accuracy, dynamic resolution and robust reliability. These tops are designed to integrate with the BASSBOSS subwoofers to create accurate, dynamic and coherent systems that work together to ensure the best possible results from top to bottom.
The cabinet is built of 15 mm Baltic Birch plywood and features an 18mm baffle with dado joinery, 4 steel bar handles, and a 15° side angle trapezoid shape. The cabinet features 5 handles and 8 fly points, with 80 x 60° rotatable coverage for multiple applications including ground stack and horizontal or vertical flying. Weatherized versions are available for outdoor installations.
The AT212 cabinets can be combined in arrays of 3 or more cabinets. The horn can be rotated and the boxes packed side-by-side to form arrays that cover 90, 120, 150, 180° and more.
BASSBOSS cabinets are hand-built in the USA. Constructed from 15mm Baltic Birch plywood, using dado joints, screws and advanced composite adhesives. Created to stand up to repeated use and abuse, the AT212 cabinet is finished in an extremely rugged, black polyurethane coating. Drivers are protected by a black powder-coated, perforated steel grill, and the amp is recessed into the back of the cabinet for protection from damage, direct sun and moisture.
The AT212 vented cabinet features 2 x 12″ mid-bass drivers and a 1.4″ throat horn-loaded compression driver. The low-frequency section features a pair of 12″ woofers in a vented enclosure. The woofers feature cast aluminum baskets, neodymium motors and 4″ diameter voice coils. The high-frequency section features a 2.5″ voice coil, 1.4″ exit compression driver loaded on an 80 x 60° degree cast aluminum horn.
All the drivers feature neodymium motor structures for the highest efficiency to weight ratio. The LF drivers have 4″ voice coils and the 1.4″ exit compression driver has a 2.5″ voice coil. The woofer coils are copper whereas the compression driver voice coil is aluminum. High-intensity Neodymium magnets are lighter and provide higher efficiency so the result is a lighter and louder cabinet.
BASSBOSS was born out of a passion for ultra-deep low-end, and a belief that tight, clean, accurate bass is the foundation of great sound. Each BASSBOSS product is a mindfully engineered, painstakingly tuned, completely integrated audio system, intended to seamlessly pair with other BASSBOSS products. BASSBOSS products are designed, CNC machined, built and assembled by hand in Austin, Texas, using only premium components. Like its siblings in the BASSBOSS lineup, the AT212 loudspeaker is optimized for full-power usage. That is to say, it's intended to be pushed hard and abused, gig after gig. So, don't hold back—crank it up.
Guitar Center's Pro Coverage
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.