The Ashly MQX-2310 is a Dual 31-band graphic equalizer that features two channels of 1/3 octave EQ in a 2-space rack unit. MQX Series EQ's use precision filter design and summing circuitry, with each filter exhibiting true constant "Q" response. The center-detented position of each fader acts as an on/off switch for its filter (to minimize any poss... Click To Read More About This Product
Find a similar product below or contact us for a recommendation of a great alternative.
The Ashly MQX-2310 is a Dual 31-band graphic equalizer that features two channels of 1/3 octave EQ in a 2-space rack unit. MQX Series EQ's use precision filter design and summing circuitry, with each filter exhibiting true constant "Q" response. The center-detented position of each fader acts as an on/off switch for its filter (to minimize any possible degradation to signal noise levels), ensuring absolutely flat response and high signal-to-noise ratios.
Instead of 20mm plastic faders typically used by other manufacturers, Ashly has selected a custom-manufactured 25mm slide fader device. The additional range and accuracy of this component allow it to offer ±15 dB of boost or cut adjustment on each individual filter (an Ashly exclusive in this class of product), and use every last bit of panel space so that small panel size doesn't compromise resolution.
Input and output connections include 1/4" TRS phone jacks, as well as standard locking XLR's. The MQX-2310 also has barrier strip connections. Ashly's servo-balanced output circuitry maintains unity gain even if pins 2 or 3 are connected directly to ground. The power supply is a universal switching power supply which operates from 90 - 240VAC, 50/60Hz with the power switch located on the rear panel. MQX Series equalizers are covered by an exclusive Five Year Worry Free Warranty.
APPLICATIONS: Monitor Systems; Front of House Sound Systems; Installations Requiring Fixed EQ; Recording/Broadcast Studios; DJ Systems
Constant "Q" design for low ripple and minimum interaction
Precision Wein Bridge Filters
Balanced XLRs and 1/4" TRS Barrier Strip Screw Terminals on Inputs and Outputs
Selectable 15dB or 6dB Range
Switchable 18dB/Octave High Pass Filter
Low Noise Design
Silent In/Out Switching
Signal Present and Clip LEDs
25mm Fader with Center-Off Position
5-Year Worry-Free Warranty
Input Type: Active Balanced
Input Impedance: 20K ohm Balanced, 10k ohm, Unbalanced
Max. Input Level: +23dBu
Output Type: Pseudo-Balanced (single ended signal with balanced impedance)
Output Impedance: 200 ohm Balanced, 100 ohm, Unbalanced
Max. Output Level: +23dBu
Connectors: 1/4" Phone jack, XLR, and Barrier Strip
Frequency Response: ± .25dB
Total Harmonic Distortion: < .01% @ +20dBu
IM (Intermodulation) Distortion (SMPTE): < .01% @ +20dBu
Output Hum And Noise: < -92dBu (20Hz-20kHz unweighted)
Crosstalk: < -80dB, 20Hz-20kHz
Filter Type: Constant Q/Wein Bridge
Bandwidth: 1/3 octave
Range: ±6 or ±15 dB
Subsonic Filter: 18dB/octave @ 40Hz, switchable
Power Requirements: Nominal Voltage: 90-125VAC, 50-60Hz, (240VAC available); Minimum Voltage: 90VAC
Shipping Weight: 10 lbs
Dimensions: 19"L x 3.5"H x 6"D
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.