Gallery
Description
Specs
Reviews
Q&A
American DJ

Description

This connector features 22 AWG stranded (0.15 x 19 ) tinned copper conductors, polyethylene insulation, twisted pair, polyethylene inner jacket, Duofoil (100% coverage) and cotton plus a tinned copper braid shield (85% coverage). PVC jacket.
American DJ 5-Pin DMX Lighting Cable 100 ft.
warning

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Specs

Conductor
  • Number of Pairs: 2
  • Total Number of Conductors: 4
  • AWG: 22
  • Stranding: 0.15 x 19
  • Conductor Diameter: .0354"
  • Conduct or Material: TC-Tinned Copper
  • Insulation Material: PE Polyethylene
Lay Length
  • Lay Length: 1.1"
  • Direction: Left Hand Lay
  • Twists: 10.9 per foot
Inner Jacket
  • Inner Jacket Material: PE- Polyethylene
  • Inner Jacket Diameter: .055"
  • Pair Color Code: Green/Black/Red/White
Outer Shield
  • Outer Shield Trade Name: Duofoil
  • Outer Shield Type: Tape/Braid
Outer Shield Material
  • Layer 1: Material Trade Name--Duofoil, Type--Tape, Material--Aluminum Foil-Polyester, Coverage %--100
  • Layer 2: Material Trade Name--Duofoil, Type--Braid, Material--TC-Tinned Copper, Coverage %--85
  • Outer Jacket Material: PVC-Polyvinyl Chloride
  • Overall Nominal Diameter: .295"
  • Operating Temperature Range: -30 degrees C To + 75 degrees C
  • Bulk Cable Weight: 50 lbs./1000
  • Minimum Bend Radius (Install): 3.5"
  • Maximum Recommended Pull Tension: 22 lbs.
  • Nominal Characteristic Impedance: 110 Ohms
  • Nominal Capacitance Conductor to Conductor @ 1KHz: 12.5 pF/foot
  • Nominal Cap Cond. To Other Cond. & Shield @ 1KHz: 23 pF/foot
  • Nominal Velocity of Propagation: 76%
  • Nominal Delay: 1.6 Nanoseconds per foot
  • Nominal Conductor DC Resistance @ 20 degrees C: 24 Ohms/1000 feet
  • Individual Pair Nominal Shield DC Resistance @ 20 degrees C: 15 Ohms/1000 feet
  • Nominal Attenuation (dB/100 feet): 0.6 (@ 1 MHz) dB/100 feet
  • Maximum Recommended Current: 2.1 Amps per conductor @ 25 degrees C

Reviews

5

4 Reviews

100%

of respondents would recommend this to a friend

Filters
Best Uses
  1. Back-Up1
  2. Concerts1
  3. Practicing1
  4. Stage Lighting1
Describe Yourself
  1. Experienced2
Pros
  1. Easy To Use2
  2. Functional1
  3. Good Quality1

Reviewed by 4 customers

  • Good Cable

    5

    submitted6 years ago

    byK.O.B.

    fromFlorida

    Use with my ADJ Par 3K Z100 Par 64 Cans, they only except 5 pin dmx cables.

  • Inexpensive DMX cable

    5

    Verified Buyer

    submitted8 years ago

    byJMV

    fromundisclosed

    A DMX cable for our light system. Cable works great and costs less than trying to make it.

  • Great product!

    5

    Verified Buyer

    submitted10 years ago

    byThomas the Tech Director

    fromGreenwood, IN

    It's used for DMX connections on lighting fixtures.

  • Great Quailty

    5

    submitted15 years ago

    byBob R

    fromFrederick, MD

    I bought some LED DMX lights and a controller, so, of course, I had to buy some cables to hook everything up. I have a truss behind the drummer and two smaller trusses on either side in front of the band. I needed some 25' cables to connect the trusses. Since DMX is like a computer network, you shouldn't use audio cable. I bought a few of these cables, hooked everything up, and then there was light. I would recommend these cables to anyone setting up a DMX light show.

  • Previous
  • 1
  • Next

Q&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.