Gallery
Description
Features
Specs
Warranty
Reviews
Q&A
AKG

collapse expand iconDescription

The AKG C 519 ML clips onto the bell of a trumpet, saxophone, trombone, tuba, or any other wind instrument (e.g. didgeridoo). Room to move for the wind section at last! Its tight cardioid polar pattern makes the C 519 an ideal tool for use near monitor wedges, and its flat frequency response delivers a natural, powerful, and clear sound.

The C 519 ML features an integrated, switchable bass cut for adjusting the microphone's frequency response to your instrument's sound. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters. The C 519 ML for use with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering (not included).
AKG C519ML Miniature Cardioid Condenser Microphone

collapse expand iconFeatures

  • Miniature condenser clip-on microphone for wind instruments, drums, and percussions
  • Miniature gooseneck for accurate microphone alignment
  • Including wireless direct adapter for easy use with AKG pocket transmitters
  • Detachable microphone cable
  • Transducer shock mount for high mechanical-noise rejection
  • Includes A 400 adapter, Microphone bag, and W 44 windscreen
warning

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

collapse expand iconSpecs

  • Polar pattern: cardioid
  • Frequency response: 60-20 kHz
  • Sensitivity: 5 mV/Pa (46 db)
  • Maximum sound pressure level: 130/132 dB SPL, (for 1%/3% THD)
  • Equivalent noise level: 31 dB-A
  • Signal/noise ratio (A-weighted): 63 db
  • Impedance: <=200 ohms
    Recommended load impedence: >=2000 ohms
  • Current consumption: approx. 2 mA
  • Power requirement: B 29 L battery power supply, or the MPA V L adapter,
  • AKG WMS Series bodypack transmitters (not included)
  • Connector: 3-pin mini XLR
  • Cable length: 5 ft. (1.5 m)
  • Finish: matte black
  • Dimensions (length x diameter): 7.9" x 1.9", 200 mm x 47 mm (microphone only)
  • Net weight: 3 oz., (85 g)

collapse expand iconWarranty

AKG Acoustics, U.S. Limited Warranty

Amended July 19, 2005

AKG Acoustics warrants AKG products against defects in material or workmanship for a period of two years from the date of original purchase, and agrees to repair or, at our option replace any defective unit without charge for either parts or labor. AKG grants a three-year warranty covering selected products (C 12 VR, C 414 B-ULS, C 414 B-TLII, C 414 B-XLS, C 414 B-XLII, C 426 B, C 451 B, C 480 B, C 391 B, C 1000 B, C 2000 S, C 3000 B, C 4000 B, C 4500 B, SolidTube) against defects in material and workmanship.

Warranty is valid for AKG products purchased and delivered within the United States for the original purchaser only. The purchaser's Bill of Sale will serve as proof of sale and warranty validity in the U.S. Shipment of defective items to AKG for repair will be at the customer's own risk and expense. AKG will assume the return shipping cost for all items repaired under warranty.

IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product, loss of parts, or connecting the product to any receptacle other than specified.

This warranty is void unless AKG Acoustics, U.S.'s service center performs the repair. No responsibility is assumed for any special, incidental or consequential damages caused by the consumer. However, the limitation of any right or remedy shall not be effective where law prohibits such.

Featured Articles