The DriveRack 260 with RTA-M Reference Microphone includes the DriveRack 260 Complete Equalization and Loudspeaker Management System and the DBX RTA-M Reference Microphone. The 260 DriveRack essential... Click To Read More About This Product
The DriveRack 260 with RTA-M Reference Microphone includes the DriveRack 260 Complete Equalization and Loudspeaker Management System and the DBX RTA-M Reference Microphone. The 260 DriveRack essentially becomes the only device that you will need between the mixer and the power amps. DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application.
DriveRack 260 DriveRack 260 Complete Equalization and Loudspeaker Management System
The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI software control provides easy PC-based control.
RTA-M Reference Microphone
The DBX RTA-M Reference Microphone is omnidirectional, and has a flat frequency response, making it ideal an a measurement microphone. The RTA-M was designed to work with the DBX DriveRack Loudspeaker Management Systems for feedback elimination in venues and studios.
2.7 seconds of alignment and zone delay
RS-232 PC GUI Software Interface control
Classic dbx compression and limiting
Graphic and parametric EQs
Full bandpass, crossover, and routing configurations
Auto gain control
Pink noise generator and fulltime RTA
Setup wizard with JBL speaker and Crown power amplifier tunings
Wall panel control inputs for permanent installations
Number of inputs: (2) line inputs, (1) RTA mic input
Connectors: (2) female XLR line inputs, XLR RTA mic input
Type: Electronically balanced/RF filtered
Impedance: >40 k ohm
Max input line level: +34dBu with input jumpers in +30 position
CMRR: >45 dB
RTA mic phantom voltage: +15 VDC
RTA mic EIN: <-110 dBu, 22 Hz - 22 kHz, 150 ohm
Number of outputs: 6
Connectors: Male XLR
Type: Electronically balanced, RF filter
Impedance: 120 ohms
Max output level: +22dBu
Type: dbx Type IV conversion system
Dynamic range line: >114 dB A-weighted, >112 dB unweighted
Type IV dynamic range: >119 dB, A-weighted, 22kHz BW; >117 dB, A-weighted, 22kHz BW
Sample rate: 48 kHz
Dynamic range: 112 dB A-unweighted, 110 dB unweighted
Dynamic range: 110 dB unweighted, >107 dB weighted
THD + N: 0.002% typical at +4 dBu, 1 kHz, 0 dB input gain
Frequency response: 20 Hz-20 kHz, +/-0.5 dB
Interchannel crosstalk: >110 dB, 120 dB typical
Crosstalk input to output: >100 dB
GUITAR CENTER'S PRO COVERAGE
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.