A reliable loudspeaker management system that optimizes your sound.

The dbx DriveRack PA+ Loudspeaker Management System builds on the tradition of the earlier DriveRack PA—one of the world's most popular loudspeaker managers. Showcasing all the features that users around the world have come to expect, including easy setup, rock-solid reliability, and unparalleled sound quality, the new DriveRack PA+ goes to great lengths to earn its "plus " designation. With more settings, more control and enhanced circuitry, dbx DriveRack PA+ puts the sound you seek right at your fingertips.

Although the DriveRack PA+ is loaded with functions and features, it is easy to set-up and use. The dbx exclusive Set Up Wizards walk you through system set up with easy-to-follow step-by-step instructions. Just pick your speakers and amps from the built-in list on the PA+, and then let the Auto Level Wizard fine tune the level settings of each speaker. You can then let the Auto EQ Wizard help you further optimize your sound. Finish up by using the AFS Wizard, which automatically sets filters to eliminate any feedback during performances. Within minutes, your PA system will sound like it was tuned by a pro! No experience required. Get the most out of your PA with the dbx DriveRack PA+, the worldwide standard in loudspeaker management.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

dbx DriveRack PA+ Loudspeaker Management System Features:

Setup Wizard Steps Through Speaker and Amp Selection and Levels
Auto EQ™ Wizard with 28-Band RTA Tunes Your System For The Venue
AFS® Wizard Helps Eliminate Feedback
Stereo Feedback Elimination with 12 feedback notch filters
dbx 120A Sub-harmonic Synthesizer
Classic dbx Input Compression
JBL® Speaker and Crown® Power Amp Tunings included
USB Firmware and Speaker Tunings Field Updatable With Harman HiQnet™ System
Architect
Full time RTA function
Front-Panel Output Mutes
Pink Noise Generator (used with Auto EQ and Auto Level Wizards)
Linked Stereo DSP Processing for ease of use
24-Bit ADC/24-Bit DAC, >113 dB Dynamic Range
2-Channel XLR Input and 6-Channel XLR Output
2x3, 2x4, 2x5, 2x6 Crossover Configurations
Dual 28-band Graphic EQ- Linked or Dual Mono
Stereo Multi-band Parametric EQ
Stereo Output Limiters
Output Alignment Delay
Power on/off Mute Circuitry
Front-panel RTA-M XLR input with phantom power
25 User Programs/25 Factory Programs
Full Graphic LCD Display
Front Panel Input and Output Meters

dbx DriveRack PA+ Loudspeaker Management System Specifications:

ANALOG INPUTS:
Number of Inputs: (2) Line inputs. (1) RTA Mic input
Connectors: (2) Female XLR line inputs, XLR RTA Mic input
Type: Electronically balanced/RF filtered
Impedance: > 40kohm
Max input line level: > +20dBu
CMRR: > 45dB
RTA Mic Phantom Voltage: +15VDC
RTA Mic EIN: < -117dBu, 22Hz-22kHz, 150

ANALOG OUTPUTS:
Number of Outputs: (6) Line Outputs
Connectors: Male XLR
Type: Electronically balanced, RF filtered
Impedance: 120 ohms
Max Output Level: > +20dBu
CMRR: > 45dB
Alignment Delay: 10ms per channel (60ms total)

A/D PERFORMANCE:
Type: dbx Type IV conversion system
Dynamic Range: 110 dB A-weighted, >107 dB unweighted
Type IV dynamic range: 123 dB with transient material, A-weighted, 22kHz BW
121 dB with transient material, unweighted, 22kHz BW
115 dB typical with program material, A-weighted,
22kHz BW
Sample Rate: 48kHz

D/A PERFORMANCE:
Dynamic Range: 112 dB A-weighted, 110 dB unweighted
Sample Rate: 48kHz

SYSTEM PERFORMANCE:
Dynamic Range: 110 dB A-weighted, >107 dB unweighted
THD+N: 0.004% typical at +4 dBu, 1kHz, 0 dB input gain
Frequency Response: 20Hz 20kHz, +/- 0.5 dB
Interchannel Crosstalk: < -110 dB, -120 dB typical
Crosstalk input to output: < -100 dB

POWER SUPPLY:
Operating Voltage: 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz,
Power Requirements: 25 Watts

PHYSICAL:
Weight: 5.5 lbs. (2.5 kg); Shipping weight 7 lbs. (3.18 kg)
Dimensions: 1.75" H x 5.75" D x 19" W, (4.4 x 14.6 x 48.26 cm)