Yorkville XS800H 800 Watt Bass Head  

Item #: 
127474183718778148
  • Write a Review

You can add real tube overdrive to either clean signal path with an innovative balance control that lets you set the perfect blend of overdriven and clean signals. Lets you maintain clarity and defini... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

You can add real tube overdrive to either clean signal path with an innovative balance control that lets you set the perfect blend of overdriven and clean signals. Lets you maintain clarity and definition while adding grunge or tube warmth. Solid-state output stage for pure, clean power. Variable-contour scoop, bass resonance, and compression controls, plus 5-band EQ with semi-parametric mid supply deep tonal command.

The Variable Contour Scoop sweeps from a flat frequency response through a mid-frequency dip at 400Hz. As you increase beyond the midway point on the control you begin to boost both the top and bottom end of your tone, in addition to further reducing the midrange level.

The Bass Resonance control regulates the damping factor of the output stage, allowing you to take full advantage of the cab's acoustic characteristic with tight, modern sound or looser vintage sound. Quiet, high-quality fans in a dual configuration eliminate the need for heavy heat sinks and keep the amp cool under the most grueling circumstances. The lack of heat sinks keeps its weight down to 25 lbs. Front panel tuner/mute switch lets you tune up quietly and mute the amp during breaks.

Other pro features include highly visible VU metering of the output signal, a front-panel wet/dry control for the footswitchable tube drive, footswitchable effects return with front panel wet/dry blend control, a pre/post selectable XLR balanced DI output with ground lift, and high power-handling Speakon extension speaker cabinet outputs plus 1/4" phono jacks.

Rugged, all-metal chassis and glass epoxy circuit boards mean it's seriously road tough. 2-year unlimited warranty.

Features
  • Switchable tube/solid state (FET) input and tube overdrive (12AX7A preamp tube)
  • Footswitchable tube overdrive and effects loop
  • Innovative wet/dry blend on tube overdrive
  • Wet/dry blend on the effects loop return
  • 5-band EQ with semi-parametric sweepable mid
  • Variable contour scoop function
  • Bass resonance control
  • 12-LED highly visible VU meter for output levels
  • Pre/Post EQ selectable XLR balanced tube DI output
  • Speakon and 1/4" extension cabinet outputs
  • Front panel mute switch with 1/4" tuner out jack
  • Switchable limiter at the output stage
Specifications
  • Power @ min. impedance (Watts) 600 @ 8 ohms/800 @ 4 ohms/600 @ 2 ohms
    Minimum Impedance (Ohms) 2
    Burst Power - 2 cycle 1,000 Watts
    Frequency Response (Hz +/-3dB) 20Hz-20kHz
    Hum and Noise (dB) -90dB Unweighted/-94db A weighted
    Input Channels 1
    Channel 1 - inputs 2x 1/4 inch, 0dB / -6dB
    Channel 1 - controls 5 Band EQ w/ parametric sweepable mid, Tube Gain
    Channel 1 - switches Limiter, Compressor, Tube Drive, Tuner Mute
    Master Volume Control Yes
    Input Sensitivity (mV) 80
    Master Outputs Speakon, 1/4 inch (x2)
    Line Out (type / configuration) Pre/Post EQ - XLR, Bal TRS
    Line Out Sensitivity (Vrms) 1
    Effects Loop / Location Rear
    Effects Footswitch / Function Tube Drive / Effects Loop
    Effects Return Sensitivity (Vrms) 1
    LED Indicators Power, Tube Drive, Compressor, Mute, EFX Rtn
    Protection Thermal, Short Circuit
    Limiter / Switchable Yes / Yes (Output Clip Limiter)
    External speaker output / location 2 x 1/4 inch, 2 x Speakon
    Headphone Jack No
    Other Features Amp In (rear)
    Parametric Mid
    Wet/Dry Blend on EFX Return
    Wet/Dry Control on Drive mode
    Adjustable Compressor
    Tuner mute switch and 1/4" tuner out jack
    Bass Resonance
    Tube/Solid State input selector switch
    12 LED Output power display with Clip indicator
    Dimensions (DWH, inches) 13 x 19 x 5
    Dimensions (DWH, cm) 33 x 48 x 13
    Weight (lbs / kg) 25 / 11.3
  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.